Dust Extraction Sanding Wheel Machine M3325 Vacuum Electric Sanding Wheel Machine Dust-Free Workshop Sanding Wheel Machine

Dust-extraction type grinding wheel machineAlso known as a vacuum belt sander Usage and Application Scope M33The Series Dust-Extraction Sanding Wheel Machines are an upgrade from our original departmental excellence product.MC30New dust removal grinding wheel machine, improved on the basis of the series dust removal grinding wheel machines.. 1.The dust-extracting grinding wheel machine is primarily used by general industrial and mining enterprises for sharpening cutting tools and can also be used for grinding, deburring, and cleaning of small parts.2.Dust-extraction type grinding wheel machine can be used at altitudes not exceeding1000Meter, surrounding air relative humidity not greater than90%, surrounding High environmental temperature not exceeding+40℃The humid tropical region.3.This unit utilizes a bag dust collector.,Dust removal efficiency up to98%The above,Dust concentration less than10milligrams/m3。Excellent vacuuming performance,AvailableLabor environment,Protect operators from dust exposure. 4.The dust-extraction type grinding wheel machine is not resistant to chemical corrosion and should not be used outdoors.Use Instructions:1.Grinder before usePlease provide the Chinese content that needs to be translated into American English.500The megohmmeter measures the insulation resistance above 500 volts, with a value not less than0.5Megaohm.2.Grinders should be thoroughly inspected for any damage or cracks in the parts due to transportation, and for any loose fasteners. If any are found, they should be tightened.  Ensure even tension. Pay special attention to the grinding wheel for cracks; gently tap with a wooden mallet, and it should produce a clear, crisp sound before use. 3.Before use, the grinding wheel machine should be manually rotated to check for smoothness and ease of movement, and closely listen for any rubbing or grinding noises.4.The direction of rotation for grinding wheels and fans should be consistent with the rotation direction indicator.5.Do not allow the workpiece to collide with the grinding wheel during operation.Gradually apply pressure to prevent the abrasive wheel from being impacted, thereby avoiding explosions and accidental incidents. 6.The abrasive wheel machine guard is strictly prohibited from being removed except for replacing the abrasive wheel and for maintenance and disassembly. 7.Two grinding wheels on a medium grit grinding machine have worn down, with a difference in their diameters.No larger than20%。 8.The grinding wheel machine should always produce normal sounds during operation. If screeching, humming, or other noises occur, the machine should be stopped immediately to check the cause of the noise, and it can only be resumed after the issue is resolved.9.Grinding wheel machine with dust collection using fabric bags,As more dust accumulates on the fabric bags, the air intake of the fan will decrease.,So, the front door should be opened regularly.,Remove dust bag,Empty the dust from the bag completely