Vertical dual-purpose sanding belt machine, Electric polishing sander 2100*50, Floor-standing sanding belt machine

Vertical grinding wheels are suitable for deburring, smoothing, and sharpening of medium to large metal parts, as well as for blade honing of cutting tools. They are widely used in mechanical manufacturing and by small and medium-sized enterprises.

M30Type upright grinding wheel machine operation and maintenance:

Grinder prior to use                  Please provide the Chinese content to be translated.An ohmmeter with a rating above 500 volts to measure its insulation resistance, which should not be less than 0.5 megohms.

2. Prior to use, the abrasive wheel machine should be thoroughly inspected for any damage or cracks due to transportation, and for loose fasteners. If any are found, they should be addressed.  Ensure tight rotation. Pay special attention to whether there are cracks in the grinding wheel. Gently tap it with a wooden mallet; a clear, crisp sound indicates it is safe to use.

3. Before using the grinding wheel machine, first manually rotate the shaft extension and observe if the movement is smooth and quick. Listen closely for any grinding or rubbing noises.

4. Grinding wheel rotation direction                  In alignment with the rotation direction sign.

5. Do not forcefully collide the workpiece with the grinding wheel while operating the grinding machine.                  Gradually apply pressure to avoid impact forces on the grinding wheel, preventing explosion.?

6. The protective cover of the trilateral abrasive wheel machine should not be removed under normal circumstances, except for replacing new abrasive wheels and for maintenance and disassembly.                                                                      。

7. In-use triangle grinding wheel machine, the diameter difference between the two grinding wheels' wear            No more than Dabu Guo20%

8. Replace with a new grinding wheel. Ensure the wheel is balanced during installation. The soft pad between the wheel and the mounting plate should fit securely, and the nut should not be tightened excessively to prevent the wheel from cracking.            After                  Secure the protective cover.

9. The lubricant in the bearings is generally replaced every six months.

10. The vertical grinding wheel machine is equipped with a worktable. When using the worktable, ensure that its support surface is at the same height as the motor shaft axis. After adjusting the height of the worktable,                  Securely fasten.

11. During storage, the grinding wheel machine should not be exposed to dampness or freezing to prevent cracking of the insulating surface, which could affect the normal operation of the machine.