Vertical Belt Sander 2400×50 Vertical Support Wheel Belt Sander

The key to operating the polishing machine is to figure out how to achieve High polishing rate to quickly remove the damaged layer produced during polishing. At the same time, ensure that the polishing damaged layer does not affect  The former requires the use of coarser abrasives to ensure a higher polishing rate for removing the damaged layer of the surface to be polished, but the polished damaged layer is also deeper; the latter demands the use of Fine material, resulting in a shallow polishing damage layer, but a low polishing rate.。Performance: Belt sanding, commonly known as cold processing, is fast, does not burn the work surface, and is equipped with a 5.5KW motor for strong power, ensuring long-term work intensity. The machine operates smoothly with simple operation. The dual-limited wheel design ensures stability while also guaranteeing damage-free sanding.Limit Adjustment HandleClockwise rotation increases the force. Counterclockwise is the opposite.Tension wheel adjustment handlePlease fine-tune.。

 Cautionary Notes

This equipment must be connected to the bottom of the leakage protection circuit breaker box to prevent electric leakage from causing injury or death to personnel.

2. Ensure the construction site is clean and tidy to prevent debris from entering the machinery and causing accidents.

Keep away from open flames, volatile gases, flammable and explosive materials.

Do not expose to rain or excessive sunlight, as it may affect the lifespan of the equipment.

5. Operators must wear protective gear: insulated gloves, boots, goggles, and masks.

6. When changing sandpaper, always disconnect the power to prevent accidents.