5.5 kW Single-Use Short Leg Polishing Machine with Dust Cover
The key to polishing machine operation is to achieve the desired polishing rate to quickly remove the damaged layer produced during polishing. At the same time, it is crucial to ensure that the polishing damaged layer does not affect the final observed tissue, i.e., it does not cause false tissue. The former requires the use of coarser abrasives to ensure a higher polishing rate for removing the polishing damaged layer, although the damaged layer is also deeper; the latter requires the use of finer materials to make the polishing damaged layer shallower, but with a lower polishing rate.。
Desk-type polishing machine. Suitable for cloth wheels, polishing wheels, wire wheels, sisal wheels, etc! Capable of polishing, rust removal, and other surface treatments! Power380W Variable Speed: 1000-10,000 RPM adjustable, Voltage: 220V, Included with 10cm Wheel Diameter
Power380 watts, variable speed: adjustable from 1000 to 10,000 RPM
Voltage:220v
Fabric roller diameter10 cm
The total length of the intermediate motor is approximately14.5 cm, total length of the machine is 19 cm, motor diameter is approximately 6 cm, main shaft diameter is 8 cmmillimeters
The main switchboard height is approximately14 cm, bottom distance from the main shaft center is approximately 10.5 cm.
Mainframe Base Long:15.5 cm, width: 13centimeters
Continuous Operating Time:50 minutes































