DYTP Parallel-Type Electro-Hydraulic Push Rod, Hydraulic Cylinder, Electric/Electro-Hydraulic Push Rod

One,    Electric push rod is composed of components such as the motor, reduction gears, screw, copper nut, guide sleeve, piston rod, bearing housing, bearing housing, spring, cylinder seat, connecting fork, and photoelectric proximity switch unit (optional for customer).

Two,2Operation Principle:

Section 3: The motor drives the lead screw nut after being stepped down by a first or second gear, converting the motor's rotation  Dynamic conversion to linear motion, benefiting The push rod reciprocates by using a motor for forward and reverse operation. Output thrust and pull force are equal. The stroke can be increased through various lever arm lengths. 3Overload Automatic Protection Feature:

Four,Electromagnetic overload protection device inside the actuator, when the stroke of the actuator reaches Location or load exceeds rated thrust  At values, push rod The power supply will automatically shut off, serving as a protective measure to prevent damage to the motor and other components; however, this should not be used as a limit during normal operation. The switch is used in a position. Therefore, an additional external limit switch device needs to be configured on the machine. Our factory can provide photoelectric proximity switch configurations for the user. Install to control the rod's normal start and stop.

One,Principles and Functions

1、Operating Principle: The electro-hydraulic push rod is powered by an electric motor. By rotating the motor in either the forward or reverse direction, hydraulic oil is output as pressure oil through a bidirectional gear pump. It then flows through an integrated oil circuit block to the working cylinder, thereby achieving reciprocating movement of the piston rod.

2、Overload Automatic Protection Function: During the operation of the electro-hydraulic push rod, if the external force on the piston rod exceeds the rated output force or the piston reaches the end position, the motor continues to rotate. At this point, the oil pressure in the oil circuit increases to the set pressure, and the overflow valve rapidly and accurately overflows, achieving overload automatic protection. Although the motor is rotating, it will not be damaged.

3、Self-locking Function: The hydraulic circuit module of the electro-hydraulic push rod is designed with a hydraulic self-locking mechanism. Once the motor stops, the piston rod immediately comes to a halt.  At the position, the pressure oil is in a pressure maintenance state.

4、The speed can be infinitely adjusted within the designated speed range according to customer requirements.

5、Perform continuous adjustment of push and pull forces within the rated output power range.

6、The travel range can be infinitely adjusted via electric control within the designated limits.

7、Electromagnetic actuators are currently categorized by their rated thrust.12 grades ranging from 25, 100, 300, 500, 700, 1000, 1600, 3200, 5000, 10000, 20000, to 30000 kg, with travel lengths of 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, and 1300 mm. Each travel length offers two speeds: 42 or 84, 50 or 100, and 26.6 or 53.2.