Product Features:

High-precision, high-force, high-stiffness support plate ensures system stability for a 5-inch high-definition touch screen. User-friendly interface and easy operation are suitable for the transmission of micro-flow thick liquids.

Feature Specifications:

1. Touchscreen Display: 5-inch high-definition touch screen, simple, clear, easy to understand, and easy to operate

2. Molder Selection: Major molders available, including square molders, and customizable options supported.

3. Calibration Function: Supports nozzle calibration and stores calibration parameters

4. Parameter Settings: Liquid Volume, Flow Rate, Infusion Time, Extraction Time, Interval Time, and Infusion Cycles are adjustable and stored.

5. Online Speed Adjustment: Flow speed can be adjusted during operation without stopping the machine

6. Power-On Operation: Stores current dynamic operating parameters during power outage, and resumes operation upon power-on.

7. Alert Feature: Real-time display of available maximum flow rate; dynamic display of operating parameters

8. Reminder Feature: Sound alarm notification upon reaching the set liquid volume.

9. Thrust Setting: Adjust thrust according to the injector specifications.

10. External Control Start/Stop: External control level signal (5-24V) or contact signal for start/stop control

11. Communication Control: Optional RS485/USB, Touch Settings for Address and Baud Rate

12. Status Output: Start/Stop, Direction Status Output

Technical Specifications:

Operation Modes: Injection, Extraction, Injection/Extraction, Extraction/Injection, Continuous, Multiple Injection

Number of Channels: 1

Extended travel: 150mm

Linear Thrust: >640N

Accuracy: 1%

Repeat Precision: 0.05%

Line Speed: 0.1um/min to 100mm/min

Step Resolution: 0.078 um/ustep

Applicable Power Source: Ac90—264V 50/60 Hz

Work Environment: Temperature: 0-40℃; Humidity: 20%-80% RH, no condensation

Protection Rating: IP31

Dimensions: 256*190*146 (mm)