Wuxi DongfutaiIn stock supply25#Round steel,25H-beam wholesale and retail,25#Round steel quality guaranteed. High quality, Daye, Great WallBenxi Steel, Zhongtian, etc.Produced by a large steel mill.
25High weldability and cold deformation plasticity, with certain strength and hardness. Good plasticity and toughness. Moderate machinability, poor hardenability and quenching. Good strength and toughness after quenching and tempering at low temperature. No tendency to temper brittleness. Generally used for manufacturing cold-pressed parts of medium and heavy machinery with low loads, small forgings, and small machined parts such as washers, shaft pins, bolts, nuts, etc.; after carburization or carbonitriding treatment, can be used to produce friction plates, piston pins, and non-critical gears; after normalization treatment, can be used as-20～475 Carbon steel forgings for pressure vessels at ℃. Weldments, hot-forged, and hot-pressed parts are carburized for use as wear-resistant components.
Material Name:Carbon steel
Product Code:25#Steel
Standard:GB/T699-1999
● Features and Application Scope:
High weldability and cold deformation plasticity, with certain strength and hardness. Good plasticity and toughness. Moderate machinability, poor hardenability and quenching. Good strength and toughness after tempering at low temperature. No tendency to temper brittleness. Generally used for manufacturing light-loaded cold stamping parts, small forgings, and small machined parts such as washers, shaft pins, bolts, nuts, etc., in heavy and medium-sized machinery; after carburizing or carbonitriding treatment, can be used to produce friction plates, piston pins, and unimportant gears; after normalizing treatment, can be used as -20～475 Forged steel for pressure vessels at °C. Weldments, hot forging, and hot stamped parts are carburized for use as wear-resistant components.
More specialty steels available! Common specifications include hot-rolled wire rod, bar, forged round steel, steel plate, seamless tube, etc.
Corresponding brand names in various countries:
ASTM StandardASTMSteel Grade:1025
Jap. Std.JISSteel Grade:S25C
Standard of Execution:GB/T 699-2015
25# Round Steel Chemical Composition:
Carbon C 0.22~0.29
Silicon Si:0.17~0.37
Manganese Mn:0.50~0.80
PhosphorusP:≤0.035
SulfurS：≤0.035
Chrome Cr:≤0.25
Nickel Ni:≤0.30
Copper Cu:≤0.25
25# Round Steel Mechanical Properties
Tensile strength σb (MPa):≥450
Yield Strength σs (MPa):≥275
elongation δ5 (%):≥23
Section reduction rate ψ (%):≥50
Impact energy Akv (J):≥70
Heat Treatment Specifications:
Heat Treatment Specifications:Austenitizing and tempering,600℃。
Delivery Status: With or without heat treatment(Annealing, normalizing, or high-temperature tempering)Status delivery.
Application:
Commonly used for machining small parts such as washers, shaft pins, bolts, nuts, friction plates, gears, and other accessories.
