Product Details

Please provide the Chinese content that needs to be translated into American English..Preface

The deaerator is a special type of low-pressure thermal deaerator.

In the boiler feed water treatment process, deoxygenation is a very critical step. Oxygen is a primary corrosive substance in both the feed water system and the boiler. Oxygen in the feed water must be removed promptly, otherwise it will corrode the boiler's feed water system and components. The corrosion will produce ferric oxide, which enters the boiler, settle or adhere to the boiler tube walls and heating surfaces, forming difficult-to-dissolve iron scale that leads to poor heat transfer. Moreover, corrosion can cause pitting on the inner wall of the pipes, increasing the resistance coefficient. Severe pipe corrosion can even lead to pipeline accidents. The national regulations stipulate that for evaporators with a capacity of greater than or equal to2Steam boiler with a capacity of more than or equal to tons per hour and water temperature95℃All of our hot water boilers are deaerated. Over the years, numerous boiler water treatments have been seeking a cost-effective deaeration method for ambient water. Lianyungang Jiusheng Power Auxiliary Equipment Co., Ltd. has years of experience in designing and manufacturing deaerators.JSNCYIntegrated Type Series Oxygen Remover(Also known as the new type of integrated oxygen remover, integrated spray type oxygen remover)Advanced design and manufacturing techniques are employed, offering numerous advantages over conventional deaerators in the industry. Several domestic companies, both established and under construction, have adopted the integrated deaerator technology, with all operational enterprises achieving favorable performance results.

Two.Deoxygenator working principle

The deaerator generally includes two working processes.:

1.One-time Oxygen Removal: Water without oxygen enters the oxygen-removing pipe through the inlet, and is ejected in a mist-like form through nozzles. The mist falls and passes through the liquid-gas mesh, where it is thoroughly mixed with steam entering through the steam inlet. This process causes the misty water to reach the oxygen-removal temperature, with most of the oxygen in the water being extracted and released through the exhaust outlet, thus completing the one-time oxygen removal.

2.Deoxygenation II: The purpose of the second deoxygenation is to ensure that the tank's temperature is consistently maintained at the deoxygenation level to maximize the deoxygenation effect. This is achieved by heating the already deoxygenated water through the auxiliary heating port at the bottom, causing any oxygen that was not precipitated during the first deoxygenation to fully separate, significantly reducing the oxygen content in the water. At this point, the second deoxygenation is complete.

Three.Integral oxygen scavenger structure

JSNCYThe Type Series Integrated Oxygen Remover consists of components such as a steam-water mixture heater, tank, soft water inlet coil, secondary heating and reboiling tube, thermal insulation board, anti-foaming device, level gauge, thermometer, automatic overflow tank, safety valve, and electric valve, as shown in the figure.

Four.Advantages of an Integrated Oxygen Remover

1.Steam and liquid are instantaneously mixed evenly, quick heating, high thermal efficiency,Energy-saving.

2.Carbonated beverage mixing with heating steam pressure below,All pressure levels above the heated liquid pressure are applicable.,And the steam pressure must be higher than the liquid pressure0.05～0.1MpaRestrictions.

3.JSNCYThe integrated deaerator has minimal vibration and low noise.

4.JSNCYType built-in oxygen removal device with compact size, Low investment required.

5.JSNCYType-built-in deaerator temperature rise is significant,Available100℃Above.

6.JSNCYThe type-inbuilt oxygen scavenger features a simple structure, is resistant to scaling, requires no maintenance, and has a long service life.

7.Utilizing low-pressure waste steam as a heat source for heating water saves energy and protects the environment.

8.Due to the selection of models based on user parameters or special design, it offers good applicability to users, operates smoothly, and meets all user requirements.

Five.Built-in Oxygen Remover Selection

Please provide the following information when placing an order:

1.Deaerator rated output

2.Water Tank Effective Volume

3.Work pressure

4.Operating Temperature

5.Inlet Water Temperature