Product Details

I. Definition

Heat exchangers, also known as heat exchangers, are devices that transfer a portion of the heat from a hot fluid to a cold fluid. They play a crucial role in various industrial processes, including chemical, petrochemical, power, food, and many others. In chemical production, heat exchangers can serve as heaters, coolers, condensers, evaporators, and reboilers, with wide applications.

II. Classified by Heat Transfer Principle

1. Shell-and-tube heat exchangers operate by allowing two fluids of different temperatures to flow in separate spaces separated by a wall. Heat transfer occurs between the fluids through the wall's thermal conductivity and convection at the wall surface.

2. Regenerative Heat Exchangers: These heat exchangers utilize a solid storage medium to transfer heat from a high-temperature fluid to a low-temperature fluid. The heat medium first heats the solid material to a certain temperature, and then the cold medium is heated through the solid material, achieving the goal of heat transfer.

3. Indirect Fluid-to-Fluid Heat Exchangers - These are heat exchangers that connect two surface heat exchangers through a circulating heat carrier. The heat carrier circulates between the high-temperature fluid heat exchanger and the low-temperature fluid, absorbing heat from the high-temperature fluid and releasing it to the low-temperature fluid.

4. Direct-contact heat exchangers, also known as mixed-flow heat exchangers, are devices where two fluids come into direct contact and mix for heat exchange. Examples include cooling towers and gas condensers.

5. A double-effect heat exchanger that combines both surface-to-surface indirect heat exchange between steam and water, and direct water-to-water mixed flow heat exchange. Compared to the surface-to-surface indirect heat exchange with steam and water, it boasts higher heat exchange efficiency; and compared to direct steam-water mixing heat exchange, it offers greater stability and lower equipment noise.

III. Categorized by Application

1. The heater is designed to heat fluids to the required temperature without causing a phase change in the heated fluid.

2. The preheater preheats the fluid, providing standard process parameters for the operation.

3. Superheater - A superheater is used to heat the fluid (process gas or steam) to a superheated state.

4. Evaporators are used to heat fluids to temperatures above their boiling points, causing the fluid to evaporate, typically involving a phase change.

IV. Categorized by Structure

Available in: Floating Head Heat Exchangers, Fixed Tube Sheet Heat Exchangers, U-Tube Sheet Heat Exchangers, Plate Heat Exchangers, etc.