Primary Technical Parameters
Number of molded blocks | 390×190×190/4 pcs per mold 390×240×190/3 pcs per mold |
Molding Cycle | 26 seconds (s) |
Productivity | 3,000-4,000 pcs/day |
Vibration Frequency | 4200r.pm |
Excitation Force | 35.5KN |
Main equipment power | 14.25kw |
Dimensions and appearance | 2060×1730×2580mm |
Pallet dimensions | 880×480×38mm |
The QTJ4-26 Electric Type Paver Block Machine is a fully automatic model developed by our factory, drawing on the advantages of previous small and medium-sized block molding equipment. Based on the QTJ4-26C model, it features four guide columns, automatic pulling molds, integrated pneumatic and electrical systems, and is equipped with two high-vibration electric devices. It utilizes bottom mold vertical orientation, directional vibration, and upper mold pressure vibration, significantly enhancing production efficiency. The blocks produced are uniformly dense and have high strength.
The block-making machine is primarily used for producing various construction materials such as cement blocks, supports, strips, stirrups, and round washers.
Purpose of Pallet Block Equipment:
Primarily used for cast-in-place buildings, highways, railways, bridges, and ancient structures; includes reinforced concrete protective layer blocks, beam supports, standard spacing blocks for steel reinforcement layers, etc. The quality of the concrete reinforcement protective pad directly affects the bearing capacity of the steel bars in the concrete engineering structure..Durability, resistance to acids and alkalis, fireproofing, and other conditions play a crucial role in the quality of the engineering work.
Padding block equipment outlook:
Nowadays in developed countriesIrregular concrete mortar reinforcement mat blocks, such as those used in Japan and the U.S., have been phased out. Plastic reinforcement mats have also been banned due to various defects, and standardized concrete reinforcement mat blocks are now widely used.
