Automatic ton bag packing machine

1Fully Automatic Ton Bag Packaging Machine System Composition

According to the requirements of the tender documents, the design of the fully automatic ton bag packaging machine system (per set) consists of the following components:

1) Fully Automatic Ton Bag Packaging Module: Quantitative gravity feeding unit (1 set), weighing unit (1 set), automatic bagging roller (1), empty bag conveyor (1 set), automatic bag feeding and enveloping unit (1 set), inflation bagging system (1 set), lifting filling unit (1 set), bag holding unit (1 set), bag mouth gripping unit (1 set), heat-sealing unit (1 set), bag mouth lifting and arranging unit (1 set), ton bag conveyor (1 set), supporting frame platform ladder (1 set), control cabinet (1 set), control system (1 set, pre-installed at factory).

2) Safety Protection: Safety fence around the equipment with a safety gate (1 set).

2Fully Automatic Ton Bag Packaging Machine Operation Process

The produced material first enters the curved feeding mechanism of the ton bag filling machine via a chute. As the packaging machine begins to package, the material is gravity-fed through the opening of the curved door into the weighing hopper. Once the weight reaches a pre-set value, the curved door of the packaging machine stops feeding. Empty packaging bags are then...80-120 bags per roll, bundled and placed into a bag stand (or via an automatic reel-up mechanism) by forklift. Empty bags move forward on the conveyor, and when the bag mouth reaches the correct position, a sensor sends a signal to the central PLC. The PLC then sends a command, and the upper and lower suction cups grip and pull the bag mouth open. The robot arm clamps the bag mouth and moves it forward and up, inserting it into the feed opening. Simultaneously, the weighing system, upon receiving the successful bagging signal, pours the material into the bag. After filling, the bag-stretching mechanism stretches the bag mouth, the bag is clamped by the holding rod and fed into the sealing station. The heat-sealing machine seals the bag mouth, the sorting device lifts the bag ties and arranges the mouth inside, facilitating subsequent stacking or loading by forklift or crane. The system completes an automatic filling of the bag.

3Basic Technical Parameters