Fully Automatic Ton Bag Packaging Machine

1Fully Automatic Ton Bag Packaging Machine System Components

According to the bid document requirements, the design of the proposed fully automatic ton bag packing machine system (per set) consists of the following components:

1) Fully Automatic Ton Bag Packaging Module: Quantitative gravity feeding device (1 set), weighing device (1 set), automatic bagging roller (1), empty bag conveyor (1 set), automatic bag loading/unloading device (1 set), inflation bagging system (1 set), lifting filling device (1 set), bag holding device (1 set), bag mouth clamp device (1 set), heat-sealing closure device (1 set), bag mouth lifting device (1 set), ton bag conveyor (1 set), supporting frame platform ladder (1 set), control cabinet (1 set), control system (1 set, installed at factory).

2) Safety Protection: Safety fence with a security gate (1 set) around the equipment.

2Fully automatic ton bag packing machine working process

The produced material first enters the curved feeding mechanism of the ton bag packaging machine via a chute. As the packaging machine begins to package, the material is gravity-fed through the opening of the curved door into the weighing hopper. When the weight reaches the pre-set value, the packaging machine's curved door stops feeding. Empty packaging bags are then...80-120 bags per roll, wrapped into a bundle, are placed into a bag box by forklift (or through an automatic coiling bag mechanism). Empty bags move forward on the conveyor. Once the bag mouth reaches the correct position, a sensor sends a signal to the central PLC, which issues a command. The upper and lower suction cups then grip and pull the bag mouth open, while the mechanical arm holds the mouth and moves the bag forward and upward, inserting it into the feed opening. Simultaneously, the weighing system, upon receiving a successful bag insertion signal, pours the material into the bag. After filling, the bag expansion mechanism stretches the bag mouth, the clamp rod holds the mouth as it enters the sealing station, a heat-sealing machine seals the mouth, and the sorting device lifts the bag straps and tucks the mouth inside, facilitating subsequent forklift or crane lifting for stacking or loading. The system completes an automatic filling of the bag.

3Basic Technical Parameters