| Origin | Shandong | Specific Gravity | 2.7（g/cm3） | Compressive Strength | 1500（MPa） |
| Bending Strength | 1500（MPa） | Application Scope | Roads, flower beds, squares, gardens, schools, etc. | Material | Granite |
| Glossiness | 90 | Brand | Zhuoke Stone | Color | Brown red, red |
| Hardness | Mo Style 7.4 | Impurities | 0.03% | Specification | 150*200*1000（mm） |
| Is cross-border sourcing available? | No |
In the post-production use of Shandong Wuhualian curbstone from the manufacturer, it is crucial to regularly maintain different types of stone products. Although they are relatively stable, as granite stone, they can still undergo changes or damage due to unforeseen factors, making proper maintenance measures very important.
Reasons for the disease in Shandong Wuhualian curbstones.
Due to improper construction methods or the lack of stone protective products, the marble used by the Wulianhua curbstone manufacturer has developed diseases such as water spots and efflorescence.
2. Over time, exposure to environmental and atmospheric pollution can cause certain granitic minerals in the stone to undergo chemical changes, leading to rusting, fading, and loss of shine. Various technical treatments can restore or nearly replicate the original decorative effect of the marble kerbstone produced by the Wulianhua Stone manufacturers.
Section II: Maintenance Measures for Lichen-affected Stone Edging from Shandong Wuhualian Manufacturer.
1 Clean and wash the surface of the five lotus flower kerbstone manufacturer's stone, remove any dirt渗透 into the stone, and then apply the rust remover. The rust remover takes longer to work; for heavily rusted areas, it may require up to 5 washes to remove the rust. If the project timeline is tight, use granite rust remover, which is corrosive to stone types and should be at least diluted 1:1 before use. Severe rust can be removed in just two applications.
2 Wash the five-leaf lotus stone kerbstone manufacturer's stone with clean water, wait until the surface of the stone is dry, and prepare the stone coloring agent. Use the diluent to: 1) reduce the concentration of the coloring agent, and 2) allow the coloring agent to penetrate deeper into the stone.
3 Coating coloring agents and protective agents, the coloring agent should be applied evenly. After application, allow to stand for more than 2 hours before wiping off the surface excess color. Check for even coloring; if uneven, repeat the coloring process. Once confirmed, apply a brightening stone protective agent, then wipe off the surface excess after 2 hours.
