Three setsThree-station polishing machine

Scope:5-300mm

Voltage: 380V

Model:ZJ-200

Main Engine Power9.75K

Length: Any

Surface Roughness:Ra ≤0.012
 

ManufacturingAccuracy：0.02mm，

 
Grinding Wheel Specifications:250*40*32mm (mold options available based on the material of the polishing workpiece)
 
Workpiece Feed Rate:1-12 meters/minute

Grinding Method: Dry/Wet grinding (optional),

Operating Noise:≤65 dB(A)

Host Weight:760Kg,

Main unit dimensions:1900mm*960mm*1200mm

https://v.youku.com/v_show/id_XMzk1MjY3MTI2OA==.html?spm=a2h3j.8428770.3416059.1

Utilizing the无心磨削 principle, consisting of two major mechanisms: the grinding and feeding units. By adjusting the feed amount of the grinding head, it is capable of performing large stock removal or fine polishing. The spacing of the guide wheels can be adjusted to process workpieces of various sizes. The feeding mechanism of this machine is equipped with a stepless speed variation device, allowing the workpiece feeding speed to be altered for optimal polishing results. Additionally, it can flexibly choose from various polishing tools such as abrasive discs, sisal wheels, fabric wheels, and nylon wheels, depending on the material and polishing requirements of the workpiece. The workpiece tray is made from wear-resistant material, eliminating the need for frequent adjustments. When changing workpiece specifications, the machine employsThe "one-way movement, double-side positioning" structure greatly simplifies the tray adjustment process. The number of main spindle heads can be specifically determined at the time of ordering, based on the original condition of the workpiece surface and the required smoothness of the finished product surface.