Company welcomes cable recycling nationwide, offering on-site collection for waste cable recycling. No middlemen, direct factory recycling, high prices, 24-hour service, looking forward to your call! High prices for recycling all types of waste cables, power cables, communication cables, marine cables, mining cables, high-voltage cables, control cables, stock cables, and other wire and cable products. Welcome units and individuals with waste cable wires to contact and negotiate recycling matters. We provide waste wire and cable recycling and dismantling services!

Cable recycling methods and introduction:
Section 1: Mechanical Crushing and Separation Method
The mechanical crushing method mainly consists of two units: crushing and sorting. Waste cables are decomposed into particles of a certain size by the crushing unit, and then sorted by the sorting unit to separate copper and plastic, resulting in pure copper and plastic.
Waste cables are conveyed to the primary crusher (triangular blade crusher) via a feeding conveyor belt. The primary crushing products are then magnetically separated to a separator screen, where larger particles are sent to copper rice crusher 1 and smaller ones to copper rice crusher 2. The crushed materials are then transported to a vibrating screen by a spiral conveyor, with a blower located at the bottom of the screen.
Material is separated into four components by wind vibration: copper rice and plastic are collected separately, while the particles that are not fully crushed and the mixture of copper rice and plastic are returned to the respective stages for recycling crushing and separation.

剥线法 - Wire Stripping Method
This method is widely used in factories for the disassembly of cables with large diameters. The working principle of the automatic stripping machine is illustrated below: The right roller stepper motor drives the upper and lower right rollers to move the clamped cable left and right; the cutting blade stepper motor drives the upper and lower cutting blades to move in opposite directions, achieving the stripping and cutting functions by controlling the displacement between the upper and lower cutting blades.
The left roller stepper motor drives the upper and lower left rollers to move the clamped workpiece line left and right; the helical roller stepper motor drives the upper and lower left rollers to move forward and backward in the opposite direction, achieving the helical function. The helical roller and the left roller refer to the same roller physically.
This method is effective for the disassembly of large-diameter cables. However, due to its heavy reliance on manual labor, it has low production efficiency for cables with medium and small diameters, poor automation, and limited cable type sorting capabilities.

Section 3: Incineration Method
Incineration typically utilizes the flammability of plastic in wires and cables to recover the metal by burning. This is an early, primitive method of metal recovery that has been phased out!
The recycling of cables involves using specific techniques to separate the conductors from the sheath, followed by sorting technology to separate the conductors from the sheath, resulting in relatively pure metals and plastics, thereby achieving the goal of resource utilization.