Company nationwide cable recycling welcome you! On-site cable recycling phone number available, no middlemen, direct recycling from manufacturers, high recycling prices, 24-hour recycling, looking forward to your call! We offer top prices for recycling all types of used cables, including power cables, communication cables, marine cables, mining cables, high-voltage cables, control cables, and stock cables, etc. Welcome businesses and individuals with used cable wires to contact and discuss recycling matters. We provide used wire and cable recycling and dismantling services!

Cable recycling methods and introduction:
Mechanical Crushing and Separation Method
The mechanical crushing method primarily includes two units: crushing and separation. Waste cables are decomposed into particles of a certain size by the crushing unit, and then separated into pure copper and plastic by the separation unit.
Scrap cables are conveyed to the primary crusher (triangular knife-type crusher) via a feeding belt. The primary crushing products are magnetically separated to a separator screen, where larger particles are fed to copper rice crushing machine 1, and smaller ones to copper rice crushing machine 2. The crushed materials are then conveyed by a spiral to a vibrating screen, the bottom of which is equipped with a blower.
Materials are separated into four components by wind vibration: copper rice and plastic are collected separately, while particles that are not fully crushed and the mixture of copper rice and plastic are returned to the corresponding stages for recycling crushing and separation.

剥线法 - Wire Strip Method
This method is widely used in factories for the disassembly of large-diameter cables. The working principle of the automatic stripping machine is illustrated below. The right roller stepper motor drives the upper and lower right rollers to move the clamped cable left and right; the cutting blade stepper motor drives the upper and lower cutting blades to move in opposite directions, and by controlling the displacement between the upper and lower cutting blades, the stripping and cutting functions are achieved.
The left roller stepper motor drives the top and bottom left rollers to move the clamped workpiece line left and right; the helical roller stepper motor drives the top and bottom left rollers to move forward and backward in the opposite direction, achieving the helical function. The helical roller and the left roller refer to the same roller physically.
This method is effective for disassembling large-diameter cables. However, due to its heavy reliance on manual labor, it has low production efficiency for cables with medium and small diameters, poor automation, and limited cable type sorting capabilities.

Section 3: Incineration Method
Incineration typically utilizes the flammability of plastic in wires and cables to recover metals by burning. This is an early, primitive form of metal recovery, now considered obsolete!
The cable recycling process involves using specific techniques to separate the conductor from the sheath, followed by sorting technology to separate the conductor and sheath, resulting in purer metals and plastics, thereby achieving resource recovery.