ZG-1L Laboratory Mini Electric Water-Cooled Compounding Machine1. Compounding Chamber Volume: 1L. Main Motor: AC motor, 3.7 kW power2. Gearbox: Base and frame are made of low-carbon steel structure, equipped with a forced lubrication circulation system.3. Rotor: Bi-convex, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel hardened treatment, surface chrome plated; ball roller bearings for bearings; bearing lubrication bath; rotor speed: 1L: 36 RPM; specific speed can be customized according to customer requirements.4. Walling: Steel structure, drilled and heat treated, with a hard chrome plated hardened inner surface; Bracket: Steel structure, with a hard chrome plated hardened inner surface.5. Top栓: Cylinder-driven, surface hard chrome plated. End face sealing: sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressure-sealed.6. Feed hopper: manual operation. Control method: manual, semi-automatic; Refining machine temperature: room temperature - 300°, capable of high temperature up to 650°.7. Base and Frame - Welded from steel pipes and plates, processed into shape. Mixing Chamber - The middle groove is made of wear-resistant alloy steel.8. The side walls are made by welding medium carbon steel plates and then processed. The shaft core and blades are made of alloy steel.9. Bushing made of ZG20 steel, roller bearings used for the bearing10. Feed Device - This machine is designed with a front feeding device, the pressure can be adjusted at will by the user's air valve.11. Leak Prevention Device - The side end of the agitator shaft uses a mechanical shaft seal to tighten, with a leak-proof structure that has received a certification.12. Pressure Cover Assembly - Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing a pneumatic cylinder for vertical up and down lifting movement13. Discharging Device: Structure - pneumatic tilting from the mixing chamber. Tilt Angle: 110°～135°. Tilt Drive: Cylinder-powered.14. Drive Structure: Main motor 3.7KW AC, voltage 380V. Drive Method: The main motor and the reducer are connected as an integrated drive.15. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping16. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alarm functions, various time settings, and capabilities for forward and reverse operation.Advantages of the machine17. Main electrical components are imported brands; the whole machine bearings are of Timken TWB brand.18. The agitator shaft is made of alloy steel. Wear-prone areas are welded with imported German wear-resistant steel, making it even more robust and durable.19. "Mountain" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel, with the shearing section being surfacing welded with German high-speed steel.20. Side wall leak-proof device made with high-tech materials: Leak-proof structure certified21. The pressure cap is designed with an "M" structure for more even rubber material mixing.22. Volume: (W×D×H) 1150*500*1580MM23. Weight: 365 kg