Brand: Nangong, Model: TP-100
This tire press is rated at 100 tons, a hydraulic type tire press, mainly used for the disassembly and assembly of solid tires for forklifts, flatbed trailers, etc. It is equipped with molds for 28*9-15 (3T forklift front tire), 650-10 (3T forklift rear tire), 700-12, 600-9, 500-8, 17.5-20, 21.00-25, and 900-20.
Main parameters are as follows:
Tyre Press Machine Pressure:
Rated Pressure of Complete Unit: 100T
Overall Structure: No deformation phenomena that would compromise the material mechanical properties occurs when exceeding 20% of the rated pressure.
H-beam material: Q235.
Tire Press Hydraulic System Design:
Power, Hydraulic System Pressure, Motor Power, Motor Speed, Hydraulic Pump Displacement, Cylinder Type, Piston Size
AC-380 160bar 4KW 1430RPM 30ML with 8ml dual-acting piston cylinder Ø250
Set the allowable stress limit:
Based on the mechanical properties of Q235 material, the allowable stress is less than 160MPa.
Shear strength: 310-380 MPa
Tensile Strength: 375-460 MPa
Tensile elongation: 25-27 (%)
Yield point stress: 235 MPa
This tire inflator technology process:
Welding Main Frame
Robust welding with no cold joints
Sharp edges are rounded off.
Sturdy screw, flange, and oil passage parts

Forklift Tire Press Machine, Solid Tire Press Machine, 100t Tire Demounting Machine - Nongong Vehicle offers long-term customization for 100 tons and 150 tons standard sizes. Please call for inquiries!

Application: Primarily for forklift tires and car tires.