Brand: Nangong, Model: TP-100
This tire press machine is rated at 100 tons and is a hydraulic type, primarily used for the assembly and disassembly of solid tires for forklifts, flatbed trailers, etc. It is equipped with molds for 28*9-15 (3T forklift front tire), 650-10 (3T forklift rear tire), 700-12, 600-9, 500-8, 17.5-20, 21.00-25, and 900-20.
The main parameters are as follows:
Tire Changer Pressure:
Rated pressure of the complete unit: 100T
Overall structure: No deformation occurs in materials that would damage their mechanical properties when exceeding the rated pressure by more than 20%.
Steel material: Q235.
Design of tire press hydraulic system
Power, Hydraulic System Pressure, Motor Power, Motor Speed, Hydraulic Pump Displacement, Cylinder Type, Piston Size
AC-380 160bar 4KW 1430R/Min 30ML with 8ml double-acting pump Ø250 cylinder
Set the allowable stress:
Based on the mechanical properties of Q235 material, the allowable stress is less than 160MPa.
Shear strength: 310-380 MPa
Tensile Strength: 375-460 MPa
Tensile elongation: 25-27 (%)
Yield point stress: 235 MPa
This tire inflation machine technology:
Welding main frame
Robust welding, no cold joints.
Sharp edges are deburred.
Sturdy screw bolts, flanges, and oil passages section.

Forklift Tire Press Machine, Solid Tire Press Machine, 100T Tire Demounting Machine. Nonggang vehicles offer long-term customization for 100 tons and 150 tons in two standard sizes. Welcome to call for inquiries!

Application: Mainly suitable for forklift tires, car tires.