Soil Dryer TRX-24

Soil Dryer Series utilizes a simulated indoor air circulation mode, known as the wind-drying mode, for soil drying. The drying air is clean, hot air that has been passed through coarse filtration and activated carbon adsorption. Each sample is stored and dried in an independent compartment, offering clean conditions and preventing cross-contamination. It is time-saving, labor-saving, space-saving, and enhances soil drying efficiency.

Key Features:

1. The soil desiccator utilizes air disturbance technology to simulate indoor air flow, somewhat approximating the indoor environment, thereby achieving the purpose of rapid drying.

2. Utilizing heated air drying technology, the efficiency of sample air-drying has been enhanced.

3. The interior features an independent 24-compartment sample room, separating samples to prevent cross-contamination.

4. The soil desiccator sample chamber is made of stainless steel, resistant to chemical corrosion and organic matter adsorption; easy to clean.

5. The sample room is equipped with a transparent observation window for customers to easily monitor the sample status at any time.

6. The sample room is equipped with trays, which can directly accommodate standard soil samples, as well as high moisture content samples such as riverbed sediments.

7. The soil desiccator comes with casters at the bottom for easy mobility.

8. Simple to operate and easy to maintain.

Soil Dryer TRX-24

Technical Specifications

Model: TRX-24

2. Power: 300W

Power Voltage: 220V, 50Hz

4. Dry air temperature range: 35±5℃

5. Number of Sample Rooms: 24 / Optional 12 Seats

6. Sample Room Dimensions (mm) (Length x Height x Depth): 200 x 120 x 300

7. Dimensions (mm) (Length x Width x Height): 1100 x 430 x 1610

The daily maintenance and care of soil desiccators include the following aspects:
Keep dry and well-ventilated: The drying cabinet should be placed on a flat, well-ventilated, and dry area.
2. Proper Door Operation: When using the drying cabinet, pay attention to the operation sequence: wait until the temperature of the items inside the cabinet reaches an appropriate level before opening the door, and act quickly, resetting the safety shield at the back of the door before it closes. Additionally, if pre-treated items are placed inside, frequent door opening is necessary during use; it is recommended not to exceed 15 seconds.
3. Proper Temperature and Humidity Settings: Maintain consistency between set and actual temperatures, ensuring the parameters remain unchanged. Maintain an appropriate humidity level. If items need to be baked or stored inside the box for more than 3 days, use a semi-enclosed method to prevent over-drying and quality degradation.
Avoid vibration: Try not to move or tilt the equipment during operation and ensure no collision with surrounding objects.
5. Clean the water tank: Check if the water tank needs refilling and empty any accumulated water before and after each use.
6. Properly Clean and Dry the Case: When cleaning residue around the case and the door, use a soft cloth or sponge, and avoid using hard objects to prevent scratching the case.