Vacuum Concentrated Crystallization Pot

The entire equipment is divided into four parts: the heating evaporation chamber, the heating jacket, the vapor-liquid separator, and the agitator. Based on the jacket heating and extensive research, our factory has designed internal heating and internal circulation heating. The evaporating and crystallizing pot has been well-received by users, with a reported evaporation efficiency that is 1.8 times higher than external heating (jacket heating).
The equipment and product contact parts are all made of 1Cr18Ni9Ti. The heating evaporation chamber, resembling a cylindrical shell, is manufactured in two sections of different thickness materials for ease of installation and maintenance, connected by flanges. The bottom can be machined into a hemispherical, disc-shaped, or conical shape on the vessel body. Both upper and lower cylindrical sections are equipped with sight glasses to observe the boiling condition of the solution, the height of entrained mist, concentration of the solution, crystal size, and distribution, etc. The pot body's access hole is designed for easy cleaning and maintenance. The lower part of the pot is fitted with a heating jacket, whose height is determined by calculating the required evaporation area.
Agitators are currently predominantly of anchor type, with a speed range of 6-15 RPM. The installation of the agitator currently uses a lower shaft setup, which can shorten the shaft length and facilitate installation and maintenance.

Technical Specifications