Wire Twisting Outsource Service

  Winding Machine Frame Specialty Steel Wire Winding Equipment Core Tube Wire Winding

  Special Wire Winding Equipment  | Frame Wire Winding Effect  | Core Tube Wire Winding Effect

Winding Wire Machine Outsource Operation Method

One, check if the wrapping machine is in the initial position. If it is, begin placing the goods on the turntable and securing the wrapping film onto the goods. At this point, you can activate the auto-run button. If not in the initial position, please run to the initial position.

Secondly, set the number of layers for the winding machine to wrap the goods based on the actual situation, including the layers at the bottom and top. Once set, activate the automatic run button. At this point, the winding machine's turntable gradually accelerates to the pre-set speed, and the film wraps automatically as the turntable rotates. The turntable counts simultaneously, and when it reaches the pre-set number of layers for the bottom layer, the film frame begins to rise.

Three, when the mold of the wrapping machine reaches a position where the photoelectric switch cannot detect it, the mold stops ascending and begins to descend. Count the up and down as one cycle. This process continues to wrap and reach the set parameters. At this point, the wrapping machine has completed all the wrapping and packaging work. The operator then only needs to manually cut the wrapping film and use a tool to transport the goods.