The integrated precast pumping station is a new type of wastewater treatment and discharge pumping station. As everyone knows, integrated pumping stations are non-standard and are customized products. The finished integrated precast pumping stations are manufactured based on specific parameters. This raises a common question among many clients: How do we determine the size and height?

Jiangsu SuYang produces integrated pumping stations, wastewater lifting stations, integrated precast pumping stations, rainwater lifting stations, and more. Whether constructing a new pumping station or renovating an existing one, most cases require meeting various specific requirements. What does "precast pumping station" mean? In the case of an intelligent integrated wastewater pumping station, the standard height specifications required by customers from Yancheng are generally around 2-16 meters. The actual dimensions are typically selected based on the flow rate; for lower flow rates, the height is lower, and for higher flow rates, the height is higher. The final size is determined after on-site inspections and customization based on the actual conditions.

The normal flow range for lift stations is typically between 25 L/S and 1350 L/S. For prefabricated pump stations, the height of the cylinder should be selected within the range of 2 to 16 meters. If the flow exceeds or equals 4000 L/S, not only does the integrated pump station cylinder require special customization, but the prefabricated pump station cylinder diameter also needs to be customized, or a multi-cylinder scheme should be adopted for processing. How is the price of a prefabricated pump station calculated based on volume?

The working principle of the integrated sewage pump station for wastewater lifting:

Wastewater treatment integrated pump stations are controlled by pressure sensors or float ball feedback to provide the liquid level information to the pre-fabricated pump station, which then adjusts the pump's on/off operation based on the set parameters of the control system. Pre-fabricated integrated pump station

When the liquid level reaches the system-set level to activate the pump, the control system will initiate the pump, thereby pumping wastewater from the prefabricated pump station to the municipal wastewater pipeline outlet. Wastewater Pumping Station

When the sewage pumping falls below the system's set liquid level, the system controls the pump to stop operating, and this cycle repeats. Integrated pumping station applications