Product Features
Guangdong ZU-H inverted flanged pressure filter wholesale manufacturer, look for Jingsheng Hydraulic Technology. This filter is installed on the pressure pipeline of the wave pressure system, used to filter out mechanical impurities mixed in the wave pressure oil and the gums, asphaltenes, carbon residues, etc. produced by the chemical changes of the wave pressure oil itself, thereby preventing malfunctions such as valve core sticking, throttle hole clogging, and damping hole plugging, as well as the rapid wear of wave pressure components. The filter has good filtration performance and high precision, but it is difficult to clean when clogged, and the filter element needs to be replaced. The filter is equipped with a pressure difference signaling device. When the filter element is polluted and clogged to a pressure difference of 0.35 MP between the oil inlet and outlet, it sends a switch signal. At this time, replace the filter element to achieve the purpose of protecting the system's safety. The filter element uses glass fiber filtration material, which has the advantages of high filtration precision, large oil permeability, small initial pressure loss, and large dirt holding capacity. Its filtration precision is calibrated by the filtration precision standard, with a filtration ratio β3, 5, 10, 20 > 200, and a filtration efficiency n ≥ 9.5%, in compliance with ISO standards.
Product Actual Photos




































