Key Features of This Machining Center
★ This machine tool is used for grinding the outer cylindrical and conical surfaces, as well as the axial end faces.
The abrasive wheel stand features horizontal feed movement with options for hydraulic quick movement, automatic cycle feeding, and manual feeding.
★ The grinding wheel bracket uses a flat-V type rolling sliding guide rail.
Name
Parameters
Grinding diameter range
6-200mm
Grinding Length
500mm
750mm
Top quality spacers
520mm
760mm
Center Height
125mm
Grinding workpiece weight
50kg
80kg
Machine Tool Dimensions (Length x Width x Height)
2000×1420×1600mm
2500×1420×1600mm
Machine tool weight
2400kg
3200kg
Workbench mobility
550mm
780mm
Table reciprocating speed
100-4000mm/min
Rotate to the upper workbench angle
-3 + 7°
Grinding Wheel Size
Φ400×40×Φ203mm
Grinding Wheel Line Speed
<35m/s
Grinding wheel shaft speed
1780r/min
Quick sanding table movement amount
20mm
Grinding wheel stand travel
150mm
One turn of the handwheel moves the sanding frame.
1mm
Fine-tune the movement of the grinding wheel holder on the micrometer caliper.
0.005mm
Spindle Speed
60.85.230.120.170.460 r/min
Headstock Rotation
-30~90°
Morse taper for the main spindle boring
Mohs hardness 3
Top-grade sleeve movement
25
Top-quality sleeve with Morse taper
Mohs hardness 3
Oil Pump Flow Rate
16 L/min
Hydraulic System Pressure
0.8-lMpa
Cooling pump flow rate
25 L/min
Grinding wheel stand motor power
4kw
Headstock motor power
0.25/0.37kw
Oil Pump Motor Power
0.75kw
Cooling pump motor power
0.9kw
Processing Accuracy
Circularity
0.0015mm
Cylindericity
0.002mm
Surface roughness
Ra0.32um
