Then,Torch Ignition SystemWhat are the main technical requirements?
     One, Windproof Burner: The torch head is made of stainless steel.304The torch head is capable of withstanding high temperatures and corrosive interference.
     Two, High-Energy Ignition System: consists of a high-frequency high-energy igniter, a high-temperature ignition gun, and wiring. Step up transformer to raise voltage above2500The voltage is rectified and used to charge the storage capacitor. Once the charging voltage exceeds the breakdown voltage of the discharge tube, the voltage on the storage unit is discharged through the discharge tube, via the ignition cable and conductive rod, onto the semiconductor nozzle. This places the nozzle's poles under a high-energy pulse voltage, generating a strong electric spark on the semiconductor surface, serving as the ignition source.
         Three, Ignition Control Cabinet: Power Supply for Control Cabinet220VReceive ignition authorization signal, manual operation achievable/Remote automatic ignition feature, primarily by SiemensPLCComprised of a signal isolator, ignition switch, ignition button, and status indicator lights, the on-site operation box is installed at the site and connected to the control cabinet, with the same operating method as the ignition control cabinet.
     Four, Flame Detector: To determine if the gas from the vent pipe is ignited, a flame feedback signal is required. This signal is composed of components such as the flame sensor and temperature scanning.