Aluminum tapeAluminum Adhesive Tape
Aluminum adhesive tape is a type of tape formed by coating a thin aluminum strip with a special adhesive.
主要用于 securing electric heating tapes in heating systems, as well as fixing the capillary tubes and temperature sensors of thermostats, or providing auxiliary fixation for flexible electric heating panels. Its function, in addition to facilitating the installation and fixation of electric heating products, is primarily to increase the surface area for heat dissipation, which is conducive to heat conduction. Specifications: 50m × 50mm × 0.05mm
Aluminum is mainly used for fixing the heating cable, temperature controller, sensor or flexible heating panel. In addition to fixing the instrument, it is mainly used for fixing electric heating cable and temperature sensor, expanding heat conducting area and enhancing heat transmitting effect. Specification: 50m×50mm×0.05mm
Aluminum Adhesive Tape - Figure 38
important aspect in demonstrating the superiority of electric tracing products.portant part in heat tracing installation.
Note: Due to installation losses, the length of aluminum adhesive tape is generally 1.2 times the length of the purchased electric heat tracing tape, to meet installation requirements.nsidering the spare consumption, we recommend that the length of the aluminum tape should be 1.2 times of the heating cable.
Heat-resistant pressure-sensitive tapeHeat-resistance Pressure-sensitive Adhesive Tape
Thermal-resistant pressure-sensitive adhesive tape, also known as fixing tape, is a type of adhesive tape formed by coating a special adhesive onto glass fiber tape.
In electric tracing heating systems, after the electric tracing is installed, secure it firmly along the pipe diameter using the heat-resistant pressure-sensitive tape every 0.8 meters. The length of the tape provided is determined by the tracing pipeline and its length.
Specification: 20m x 20mm x 0.1mm
This adhesive tape is a kind of glass fiber with special adhesive. After the electric heating cable is installed with aluminum adhesive tape, the tape is used radially along the pipe to fix cable tightly in every 0.8m interval. Specification: 20m×20mm×0.1mm
Heat-resistant Pressure-Sensitive Adhesive Tape - Figure 39
Excellent weather and heat resistance (-40~200℃)
superior weather-resistance and heat-resistance
Excellent oil, solvent, and water resistance
excellent oil, solvent and water resistance
Stable performance, colorfast, and good adhesion to the base material
stable performance, no discoloration, closely attach to the surface
High polymer cohesion, suitable for products with high durability requirements.
polymer has strong cohesive force, suitable for the products need long performance
Throat loomPipe Clamp
Throat collars are stainless steel bands used to secure electric heating element attachments, and can be cut to the required length as needed.
Pipe clamp is made of stainless steel belt to fix accessories of heating cable and cut to length.
Collar Specifications: Width: 12.5mm, Thickness: 0.5mm
Specification: width thickness
Cut a section of steel belt, slightly longer than the tube diameter and the base of the power supply junction box (or temperature controller base).
the length should be longer than the length of tube diameter and the base of power connection kit (temperature controller)
Secure the steel strip onto the pipe and base.
clasp the base with the pipe
Use a screwdriver to turn the screw until the clamp is tightened, securing the power junction box to the pipe.
tighten the clamp
Warning SignWarning Label
Warning label is placed on electric tracing pipes or tanks to indicate the cable or power supply location, preventing unnecessary damage due to incorrect installation.
