The LLW Horizontal Spiral Discharging Filter Centrifuge is a continuous operation centrifuge for filtration. It boasts high processing capacity, low electricity consumption per unit output, and stable operation. It can continuously feed, wash, dewater, and discharge the suspension at full speed. It serves as a separation equipment for solid-liquid separation.

Centrifuge requirements for peripheral conditions:

3.1 Water Pressure: 0.1～0.2 MPa

3.2 Compressed Air: 0.4～0.6 MPa

3.3 Main Power Supply: 3-phase 5-wire system, 50Hz, 380V

3.4 Environmental Requirements for the Main Control Cabinet:

a) Installed in an indoor environment free of corrosive gases, flammable gases, oil mist, condensation, steam, or salt, etc.

b) Altitude below 1,000m

c) Environmental Temperature: -10 to 40°C

d) Humidity: No condensation of water droplets

4、The main technical parameters of the centrifuge:

4.1 Large end diameter of drum: 530mm

4.2 RPM: 2000 RPM per minute

4.3 Separation Factor: 1190

4.4 Motor Power: 30KW, Inverter: 30KW, Oil Pump Motor: 0.55KW

4.5 Main Engine Weight: 2600 kg

4.6 External Dimensions: (1850*1500*1480mm)