Laboratory fume hoods, Laboratory ventilation systems, Full steel ventilation cabinets, VIV Smart Airflow Control System specifications: The main body is made of 1.0MM thick cold-rolled steel plate, treated with pickling and phosphatization for rust prevention. The surface of the laboratory fume hood, laboratory ventilation system, full steel ventilation cabinet, and VIV Smart Airflow Control System is coated with epoxy resin electrostatic powder spray, with a coating thickness of 80 micrometers. (Upper cabinet: features slanted edge frame design, with a main switch on the side panel, LED display control panel, and four waterproof outlets. The 5mm tempered glass sliding doors of the laboratory fume hood, laboratory ventilation system, full steel ventilation cabinet, and VIV Smart Airflow Control System are designed with synchronous belt, ensuring smooth and durable operation.Laboratory fume hoods, laboratory ventilation systems, full steel ventilation cabinets, VIV Intelligent Airflow Control SystemTop configuration: Corrosion-resistant LED lighting. (3) Drainage system: Three-section drain plate design ensures reasonable air flow inside the cabinet, laboratory fume hood, laboratory ventilation system, full steel ventilation cabinet, VIV intelligent air control system reduces eddies and dead corners. Made of 5mm thick acid and alkali-resistant baltic board, all assembly screws are covered with plastic caps to prevent contact with cabinet gases and maintain aesthetics. (4) Worktop: 12.7mm solid chemical board, resistant to acid and alkali corrosion.Laboratory fume hoods, laboratory ventilation systems, full steel ventilation cabinets, VIV intelligent air control system(5) Bottom Box: The main body is made of 1.0mm thick cold-rolled steel plate, which has been treated with acid washing and phosphatization for rust prevention.Laboratory Fume Hoods, Laboratory Ventilation Systems, Full Steel Ventilation Cabinets, VIV Intelligent Airflow Control SystemThe surface is electrostatic powder coated with epoxy resin. Lab fume hoods, lab ventilation systems, fully steel ventilation cabinets. VIV intelligent air control system with a coating thickness of 80 micrometers. Double-layer door design, one-piece bent lever handle. Equipped with DTC buffer hinges. The 9.1 H-type frame is welded from 40*60*1.5mm steel, with surface phosphatized, acid washed, and electrostatic powder coated with epoxy resin.Laboratory Fume Hoods, Laboratory Ventilation Systems, Full Steel Ventilation Cabinets, VIV Intelligent Airflow Control SystemSide panels and back panels are made of 15mm thick E1 grade high-density medium-density fiberboard with melamine foil surface bonded. The base is equipped with shock-absorbing feet to eliminate the effects of uneven ground. It features anti-slip, shock-absorption, and adjustable lab table level, with a range of 0~50mm. 9.2 Laboratory fume hood, laboratory ventilation system, full steel fume cabinet, VIV intelligent air control system - The countertop is made of 15mm thick black gold sand material, with the edges thickened to 30mm. 3.1 Laboratory-specific sink and mold are formed in one piece, with a smooth surface and resistance to acids and alkalis. 4.1 The three-joint tap with a 90-degree ceramic valve core is used for laboratory-specific purposes, the outlet spout is made of copper with a pointed tip, is removable, and has a female threaded design. 4.2 It can conveniently connect to recirculation and other special water supplies; the pipe body is made of brass alloy, laboratory fume hood, laboratory ventilation system, full steel fume cabinet, VIV intelligent air control system - The copper surface is treated with baked paint spraying.Laboratory fume hoods, laboratory ventilation systems, all-steel ventilation cabinets, VIV intelligent air control systemEnhanced resistance to acid, alkali, corrosion, and rust. The 2.1 reagent shelf column, which can rotate 360 degrees, is made of aluminum alloy profiles. The surface is treated with acid washing, phosphatization, and uniform electrostatic epoxy coating, featuring chemical rust prevention and resistance to acid and alkali corrosion. 2.2 Reagent shelf boards: 10mm tempered glass, with chamfered edges on all sides for smoothness and non-abrasive touch. Equipped with glass trays and steel plate bent hooks, the height can be freely adjusted to accommodate comfort requirements. 2.3 Each column is fitted with two five-hole power outlets, with a steel structure base box featuring surface coating treatment.