The ISG type centrifugal pump is an energy-saving product designed and manufactured based on the parameters of the IS type centrifugal pump and pipeline pump, referring to ISO 2858 and the new pipeline centrifugal pump standard JB/T 53058-93.

The ISG type centrifugal pump is a energy-saving product designed and manufactured based on the parameters of the IS type centrifugal pump and pipeline pump, referring to ISO 2858 and the new pipeline centrifugal pump standard JB/T53058-93. The pump is optimized with a domestic hydraulic model. Additionally, based on different usage temperatures, media, etc., it has derived into hot water pumps, high-temperature pumps, chemical pumps, oil pumps, etc., on the basis of the ISG type, and is currently a standardized and promoted product.

ISG type centrifugal pump product application:

1. ISG type centrifugal pump, designed for transporting clean water and other liquids with similar physical and chemical properties, suitable for industrial and urban water supply and drainage, high-rise building pressure boosting, garden irrigation, fire-fighting pressure boosting, and equipment matching. Operating temperature T: ≤80℃.

2. IRG (GRG) Type Hot Water (High-Temperature) Circulation Pumps - Suitable for energy, metallurgy, chemical industry, textile, papermaking, as well as hotel and restaurant boiler high-temperature hot water pressure boosting circulation and urban heating system circulation. IRG operating temperature T: ≤120℃, GRG operating temperature T: ≤240℃.

3. IHG type pipeline chemical pump, designed for transporting liquids free of solid particles, corrosive in nature, and with a viscosity similar to water, suitable for industries such as oil, chemicals, metallurgy, power, papermaking, food, and synthetic fibers. Operating temperature range: -20℃ to 120℃.

4. YG type pipeline oil pump, designed for transporting gasoline, diesel, kerosene, and other petroleum products; operating temperature range: -20℃ to 120℃.

ISG type centrifugal pump operating conditions:

1. Suction pressure ≤ 1.0 Mpa, or system working pressure of the pump system ≤ 1.6 Mpa, i.e., pump suction pressure + pump head ≤ 1.6 Mpa; static test pressure of the pump is 2.5 Mpa. Please specify the system working pressure when placing an order. If the working pressure of the pump system exceeds 1.6 Mpa, it must be stated separately at the time of ordering. This allows for the use of cast steel material for the overflow components and connection parts of the pump during manufacturing.

2. Ambient temperature < 40°C, relative humidity < 95%.

3. The volume content of solid particles in the conveyed medium does not exceed 0.1 times the volume of the medium, with particle size less than 0.2mm.

Note: If the medium contains fine particles, please specify at the time of ordering to facilitate the use of _type mechanical seal.

ISG type centrifugal pump model significance:

ISG100-160(I)AB

ISG - Vertical Centrifugal Pump

100 - Nominal Diameter (mm) for Inlet and Outlet of Pumps

160 - Impeller Nominal Diameter (mm)

I- Traffic Classification

AB- The impeller is cut once and then again.