Item Name: N-Type Differential Impedance Transformer
Model Specifications: RFN-50J/75K
Three: Product Part Number: RF3.640.025
Four: Product Design Grade: General Connector Level 2
Section 5: Connection Type: Threaded connection 5/8”-24 UNEF-2A (2B)
Section 6: Applicable Standards: IEC60169-1, IEC60169-16
Section 7: Compatibility: Compatible with connectors featuring N-type socket and pin contact pieces.
Section 8: Technical Specifications:
Materials and Surface Treatment
B. Electrical Performance:
C. Mechanical Properties:
D. Work Environment:
9. Cable Termination Method: Not applicable
Ten: Installation Mode: Free Connection
Section 11: Material Introduction:
A. Basic Information: The product features a freely installable N-type pin plug, plug-in impedance transformer.
B. Packaging and Storage: Inner and intermediate packaging: Plastic bag unit packaging, then placed in a large bag. A certificate of compliance is placed inside the bag, and an environmental-friendly label is affixed outside. Outer packaging: Corrugated cardboard boxes.
Storage Conditions: Stored in a warehouse with temperatures ranging from -10°C to +35°C, relative humidity not exceeding 80%, and free of corrosive gases such as acids and alkalis in the surrounding air.
Twelve: During the connection, it is necessary to align first before tightening with a torque wrench.
Thirteen: Materials comply with RoHS requirements.
Section 14: Product Features: Compact size, low power consumption, high gain, high sensitivity, stable performance.
Chapter 15: Product Applications: Aviation manufacturing, aviation maintenance, underground parking garages for scientific research laboratories, indoor showrooms, etc.
Conductor: Material is bronze QSn6.5-0.1, GB3124-82
Coating: Electroplated Gold
Shell: Material is brass, HPb59-1, GB4425-84
Coating: Electroplated Nickel
1. Characteristic Impedance: 50Ω~75Ω
Frequency Range: 1.5G-2.9GHz
3. Working Voltage: 1000V
4. Contact Resistance: Inner Conductor: ≤1 mΩ; Outer Conductor: ≤1 mΩ
Insulation Resistance: ≥5000 MΩ
6. Medium Pressure Resistance: 2500V
7. VSWR: ≤1.2
Insulation pull-off force: >0.57N
2. Mechanical lifespan: >500 cycles (12 cycles per minute)
3. Torque for connecting nuts: Recommended 0.68~1.13 N·m.
Temperature Range: -55~155℃
Relative humidity: 95% at +40℃
