Detailed Description

I. Product Performance Description

1. Our industrial sliding doors are primarily used as exterior and interior doors for warehouses, garages, factories, and airport docks.

2. Features include smooth operation, low noise, thermal insulation, wind and dust resistance, and corrosion resistance.

3. Service Life: The normal service life of industrial sliding doors is not less than 200,000 cycles.

4. Wind Pressure Resistance: Industrial sliding doors must have a wind pressure resistance of not less than 750Pa. Special performance can be enhanced upon request.

5. Insulation Performance: Insulation performance not less than Grade 6 as specified in GB/T8484-2002, "Classification and Testing Methods for Insulation Performance of External Windows of Buildings."

6. Actuation Control: The actuation control device is sensitive and lightweight. The opening and closing speed is 10-15m/min, with noise level less than 65dB. In case of power failure, manual operation is used for opening and closing, with an actuating force below 100N.

7. Operating Voltage: AC 220V/380V, Power: 0.75kW/1.5kW/2.2kW.

8. Control System Performance: Optional wireless remote control with an effective range over 30 meters. Also features a manual button. The control system operates normally at temperatures between -10℃ to 40℃ and relative humidity ≤ 85%.

Section 2: Product Advantages

1. Door Panel: The door is constructed with a color steel composite panel, available in two thickness options of 40mm/50mm. The inner and outer steel plates are 0.45mm thick, filled with high-density polyurethane foam material, and protected with a film. It features built-in reinforcing ribs and double-sided strips, exuding luxury and elegance. Each door panel has evenly spaced grooves on the inner wall to enhance the door's impact resistance.

2. Filling: Internally filled with 45kg/m3 of non-fluorinated polyurethane foam material, equipped with reinforced steel bands for excellent thermal insulation, heat preservation, insulation, and soundproofing effects.

3. The surface steel plates are securely bonded without any gaps, ensuring the overall strength and reliability of the door panel.

4. Edge Sealing: The two end surfaces of the door panels are sealed with painted hot-dipped galvanized steel, sturdy and durable, with hinges fixed to the seal for added strength.

5. Sealing: Each door is equipped with top, bottom, and sealing strips, and there are also sealing strips at the joint between the track and the door panel, ensuring an excellent sealing effect.

6. Balance System: The overhead door is balanced by high-tensile springs, which have a lifespan of 100,000 cycles. All spring surfaces are electroplated for enhanced corrosion resistance. The torsion spring material is 60SI2Mn, and different models of torsion springs are selected based on the door size and lifting method. Good torsion springs can effectively balance the door's weight, allowing the door to stop at any position without the motor, reducing the motor's load and extending its service life (high-quality torsion springs require only a small pulling force from the motor to smoothly lift and lower the sliding door).

7. External Handle: The door bottom is equipped with an aesthetically pleasing built-in handle for easy manual opening.

8. Small Door: An optional pedestrian passageway can be set within the door to ensure pedestrian safety.

9. Door with Small Window: Double-layer transparent insulating organic glass window, sealed and fixed with double-sided sealing strips between the window frame and the organic glass. Rubber frame (optional).

10. Tracks: Made of hot-dipped galvanized steel plates, with passivation treatment for high corrosion resistance; aesthetically pleasing, with great strength and resistance to deformation; ensures smooth operation along the fixed path of the sliding door on the tracks.

11. Wheels: Accompanied by steel roller (distinguishing from regular plastic rollers), sturdy and durable.

12. Guide Rail Reinforcement: To strengthen the door body and ensure the installation strength of the sliding door track, preventing deformation of the track, and making the door body robust and durable; when installing large-scale lifting industrial doors, steel auxiliary tracks are installed on both sides of the doorway (encasing the track within the auxiliary track for fixation). These auxiliary tracks are made of cold-rolled steel, which can moderately guarantee the door body's robustness.

Section 3: Composition of Safety Protection Devices

Wire Rope Break Prevention and Torsion Spring Break Prevention Device

Anti-fall device; in any event of accidental breakage of the torsion spring or wire rope, the anti-breakage safety bracket for the wire rope automatically opens, preventing the door from falling; reaction time of 0.1 seconds; the door will stop within a range of 10 cm.

2. Safety Protection Device

If a person or object passes through during the closing process, the safety device identifies this and the door bounces upwards for protection. Reaction time is 0.1 seconds. The safety device will reverse the door until it is fully open.

The safety protection devices comply with the requirements of EN 12453:2000 and EN 12445:2000 standards.

Section 4: Basic Components of Industrial Sliding Doors

Transmission System: Comprising industrial door motor, drive shaft, balancing system, wire rope, wire rope drum, etc.

2. Door System: Composed of door panels, auxiliary tracks, straight tracks, curved tracks, small windows, small doors, and hardware accessories.

3. Operating System: Composed of components such as the control box, remote controller, etc.

4. Safety System: Comprised of features such as wire rope anti-breakage devices, torsion spring anti-breakage devices, and photoelectric automatic control devices.

1. Track Mounting 2. Auxiliary Track 3. Cross Rail 4. Cross Rail Fixed Angle Iron 5. Side Seal Strip 6. Solid Shaft

7. Coupling 8. Bearing Housing 9. Winding Wheel 10. Torsion Spring 11. Torsion Spring Breakage Prevention Device 12. Fixed End Torsion Spring Housing 13. Tension Spring End Torsion Spring Housing 14. Industrial Door Motor 15. Control Box 16. Buffer 17. Roller 18. Top Wheel Bracket 19. Top Door Panel 20. Skylight 21. Middle Door Panel 22. Side Hinge 23. Bottom Door Panel 24. Handle 25. Bottom Seal Strip Aluminum Bracket 26. Bottom Seal Strip 27. Bottom Wheel 28. Wire Rope 29. Wire Rope Breakage Prevention Device 30. Bottom Door Panel Cap 31. Vent Window 32. Middle Door Panel Cap 33. Top Door Panel Edge Sealing 34. Top Seal Strip 35. Top Seal Strip Bracket 36. "7" Angle Iron 37. Center Hinge 38. Manual Chain

Three Installation Methods Diagrams for Industrial Sliding Doors:

One, high lift

Vertical Enhancement

Section 3: Standard Enhancement

JadeDoor Enhances Gate Production Line

Enhance door hardware and panels