Detailed Description
Product Performance Description
1. Our industrial sliding doors are primarily used for exterior and interior doors in warehouses, garages, factories, and airport docks.
2. Features include smooth operation, low noise, thermal insulation, wind and dust resistance, and corrosion resistance.
3. Service Life: The normal service life of industrial sliding doors is not less than 200,000 cycles.
4. Wind Pressure Resistance: The wind pressure resistance of industrial sliding doors is not less than 750Pa. Special performance can be enhanced upon request.
5. Thermal Insulation: Thermal insulation performance not less than Grade 6 as specified in the "Classification and Testing Methods for Thermal Insulation of External Windows of Buildings" GB/T8484-2002.
6. Open/Close Control: The control device is sensitive and lightweight. The opening and closing speed is 10-15m/min, with noise less than 65dB. In case of power failure, manual operation is used for opening and closing, with an action force below 100N.
7. Operating Voltage: AC 220V/380V, Power: 0.75kW/1.5kW/2.2kW.
8. Control System Performance: Optional wireless remote control device with an effective range over 30 meters, featuring a manual button as well. The control system operates normally under -10℃ to 40℃ temperatures and relative humidity ≤ 85%.
II. Product Advantages
1. Door Panel: The door consists of a color steel composite door panel, available in two thicknesses: 40mm and 50mm. The inner and outer steel plate thickness is 0.45mm, filled with high-density polyurethane foam, protected with a film, and reinforced with internal ribs and double-sided strips, exuding luxury and elegance. Each door panel has evenly spaced grooves on the inner wall to enhance the door's shock resistance.
2. Filling: Center-filled with 45kg/m3 of non-fluorinated polyurethane foam material, internally reinforced with steel strips, offering excellent thermal insulation, heat preservation, insulation, and soundproofing effects.
3. The surface steel plate joints are securely sealed without any gaps, ensuring the overall strength and reliability of the door panel.
4. Edging: The two end surfaces of the door panels are sealed with painted hot-dipped steel sheets, offering durability and strength. The hinges are securely fastened to the edging, enhancing the overall stability.
5. Sealing: All doors are equipped with top, bottom, and sealing strips, as well as sealing strips at the junction of the track and door panel, ensuring excellent sealing performance.
6. Balance System: The overhead door is balanced by high-tensile springs, with a service life of 100,000 cycles. All spring surfaces are electroplated for enhanced corrosion resistance. The torsion spring material is 60SI2Mn, and different types of torsion springs are selected based on the door size and lifting method. A well-designed torsion spring can effectively balance the door's own weight, allowing the door to stop at any position without the motor, reducing the motor's stress and extending its lifespan (with high-quality torsion springs, the motor only needs to exert a small pulling force to allow the sliding door to rise and fall smoothly).
7. External Handle: The door bottom features an aesthetically pleasing built-in handle for easy manual opening.
8. Small door: An optional pedestrian access door can be set within the door to ensure pedestrian safety.
9. Door with Small Window: Double-layer transparent insulating organic glass window, sealed and fixed with double-sided sealing strips between the window frame and the organic glass. Rubber frame (optional).
10. Tracks: Made of hot-dipped galvanized steel plates, with passivation treatment for high corrosion resistance; aesthetically pleasing, strong, and resistant to deformation; ensures smooth operation of the sliding door along the fixed track.
11. Wheel: Accompanied by steel roller (distinguishing from ordinary plastic roller), sturdy and durable.
12. Track Reinforcement: To strengthen the door body and ensure the installation strength of the sliding door track, preventing deformation, and making the door body durable; during the installation of large-scale lifting industrial doors, steel auxiliary tracks are installed on both sides of the doorway (encasing and securing the track within), which are made of cold-rolled steel plates, providing limited reinforcement to the door body's sturdiness.
Section 3: Composition of Safety Protection Devices
Wire Rope Break Preventive Device and Torsion Spring Break Preventive Device
Anti-fall device, in any case of accidental breakage of the torsion spring or wire rope, the anti-breakage safety bracket for the wire rope automatically opens, preventing the door body from falling; reaction time is 0.1 seconds; the door stops within a range of 10 cm.
2. Safety Protection Device
The door reverses and bounces upwards if a person or object passes through during the closing process, serving as a protective mechanism. Reaction time is 0.1 seconds. The safety device will continue to reverse the door until it is fully open.
Safety devices comply with EN 12453:2000 and EN 12445:2000 standards.
Section 4: Basic Components of Industrial Sliding Doors
1. Drive System: Composed of industrial door motor, drive shaft, balancing system, wire rope, wire rope wheel, etc.
2. Door System: Comprised of door panels, auxiliary tracks, straight tracks, curved tracks, small windows, small doors, and hardware accessories, etc.
3. Operating System: Comprises of control box, remote controller, and other components.
4. Safety System: Comprising features such as rope anti-breakage device, torsion spring anti-breakage device, and photoelectric automatic control device.
1. Track Mounting 2. Auxiliary Track 3. Cross Rail 4. Cross Rail Fixed Angle Iron 5. Side Sealing Strip 6. Solid Axle
7. Coupling 8. Bearing Housing 9. Winding Wheel 10. Torsion Spring 11. Torsion Spring Breakage Prevention Device 12. Fixed End Torsion Spring Housing 13. Tension Spring End Torsion Spring Housing 14. Industrial Door Motor 15. Control Box 16. Buffer 17. Roller 18. Top Wheel Bracket 19. Top Door Panel 20. Skylight 21. Middle Door Panel 22. Edge Hinge 23. Bottom Door Panel 24. Handle 25. Bottom Seal Strip Aluminum Bracket 26. Bottom Seal Strip 27. Bottom Wheel 28. Wire Rope 29. Wire Rope Breakage Prevention Device 30. Bottom Door Panel Cap 31. Ventilation Window 32. Middle Door Panel Cap 33. Top Door Panel Edge Sealing 34. Top Seal Strip 35. Top Seal Strip Bracket 36. "7" Angle Iron 37. Center Hinge 38. Manual Chain
Three Installation Methods of Industrial Sliding Doors Diagram:
One, High Position Lifting
Vertical Enhancement
Section 3: Standard Enhancement
JadeDoor enhances door production line
Enhance door hardware and panels
