Detailed Description

I. Product Performance Description

1. Our industrial sliding doors are primarily used as exterior and interior doors in warehouses, garages, factories, and airport terminals.

2. Features stable operation, low noise, thermal insulation, wind and dust resistance, and corrosion resistance.

3. Service Life: The normal service life of industrial sliding doors is not less than 200,000 cycles.

4. Wind Resistance Performance: The wind resistance value of industrial sliding doors must not be less than 750Pa. Special performance can be enhanced upon request.

5. Insulation Performance: Insulation performance not less than level 6 as specified in GB/T8484-2002, "Classification and Test Methods for Insulation Performance of External Windows of Buildings."

6. Opening and Closing Control: The control device is sensitive and lightweight. The opening and closing speed is 10-15 m/min, with noise level less than 65 dB. In the event of a power outage, manual operation is used for opening and closing, with an action force of less than 100N.

7. Working Voltage: AC 220V/380V, Power: 0.75kW/1.5kW/2.2kW.

8. Control System Performance: Optional wireless remote control device with an effective range over 30 meters, featuring a manual button. The control system operates normally at temperatures between -10℃ and 40℃ and relative humidity ≤ 85%.

II. Product Advantages

1. Door Panel: The door body features a color steel composite door panel, available in two thicknesses of 40mm/50mm. The inner and outer steel plates are 0.45mm thick, filled with high-density polyurethane foam material, and equipped with a protective film. It includes reinforced ribs and double-sided strips, exuding luxury and elegance. Each door panel inner wall has evenly spaced grooves to enhance the door's impact resistance.

2. Filling: Center-filled with 45kg/m3 of non-fluorinated polyurethane foam material, internally reinforced with steel strips, offering excellent thermal insulation, heat preservation, insulation, and soundproofing effects.

3. The surface steel plates are firmly joined without any gaps, ensuring the door panel's overall strength and reliability.

4. Edging: The two end surfaces of the door panels are sealed with painted hot-dipped steel plates, offering strength and durability. The hinges are securely fastened to the edging, enhancing the stability.

5. Sealing: All doors are equipped with top and bottom seals, as well as seals at the junction of the track and door panel, ensuring an excellent sealing effect.

6. Balance System: The overhead door is balanced by high-tension springs, which have a lifespan of 100,000 cycles. All spring surfaces are electroplated for enhanced corrosion resistance. The torsion spring material is 60SI2Mn, and different models of torsion springs are selected based on the door size and lifting method. Good torsion springs can effectively balance the door's own weight, allowing the door to stop at any position without the motor, reducing the motor's load and extending its service life (high-quality torsion springs require minimal pulling force from the motor to smoothly raise and lower the sliding door).

7. External Handle: The door features an aesthetically pleasing built-in handle at the bottom, facilitating manual door opening.

8. Small Door: An optional pedestrian door can be installed within the main door to ensure pedestrian safety.

9. Door with Small Window: Double-layer transparent insulating organic glass window, sealed and fixed with double-sided sealing strips between the window frame and the organic glass. Rubber frame (optional).

10. Tracks: Made of hot-dipped galvanized steel plates, with passivation treatment for high corrosion resistance; aesthetically pleasing, with high strength and resistance to deformation; ensures smooth operation of the sliding door along the fixed track.

11. Wheel: Accompanied by steel roller (distinguishing from ordinary plastic roller), sturdy and durable.

12. Rail Reinforcement: To strengthen the door structure and ensure the installation strength of the sliding door track, prevent track deformation, and make the door durable, steel auxiliary rails are installed on both sides of the door opening when installing large-scale lifting industrial doors (the tracks are enclosed within the auxiliary rails for fixation). These auxiliary rails are made of cold-rolled steel and can effectively limit the door's structural integrity.

Section 3: Composition of Safety Protection Devices

Wire Rope Break Prevention and Torsion Spring Break Prevention Device

Anti-fall device, in case of accidental breakage of the torsion spring or wire rope under any circumstances, the anti-breakage safety bracket for the wire rope automatically opens to prevent the door from falling, with a reaction time of 0.1 seconds; the door will stop within a range of 10 cm.

2. Safety Protection Device:

The door reverses and bounces upwards if a person or object passes through during closure, activated by a safety device for protective purposes. Reaction time is 0.1 seconds. The safety device will continue to reverse the door until it is fully open.

The safety protection devices comply with the requirements of EN 12453:2000 and EN 12445:2000 standards.

Section 4: Basic Components of Industrial Sliding Doors

1. Transmission System: Composed of industrial door motor, drive shaft, balancing system, wire rope, wire rope wheel, etc.

2. Door System: Composed of door panels, auxiliary tracks, straight tracks, curved tracks, small windows, small doors, and hardware accessories.

3. Operating System: Composed of components such as the control box and remote controller.

4. Safety System: Composed of wire rope anti-breakage device, torsion spring anti-breakage device, photoelectric automatic control device, etc.

1. Track Mounting 2. Auxiliary Track 3. Cross Rail 4. Cross Rail Fixed Angle Iron 5. Side Seal Strip 6. Solid Shaft

7. Coupling 8. Bearing Housing 9. Winding Wheel 10. Torsion Spring 11. Torsion Spring Break Prevention Device 12. Fixed End Torsion Spring Housing 13. Tension Spring End Torsion Spring Housing 14. Industrial Door Motor 15. Control Box 16. Buffer 17. Roller 18. Top Wheel Bracket 19. Top Door Panel 20. Light Transmittance Window 21. Middle Door Panel 22. Side Hinge 23. Bottom Door Panel 24. Handle 25. Bottom Seal Strip Aluminum Bracket 26. Bottom Seal Strip 27. Bottom Wheel 28. Wire Rope 29. Wire Rope Break Prevention Device 30. Bottom Door Panel Cap 31. Ventilation Window 32. Middle Door Panel Cap 33. Top Door Panel Edging 34. Top Seal Strip 35. Top Seal Strip Bracket 36. "7" Angle Iron 37. Center Hinge 38. Manual Chain

Three Industrial Sliding Door Installation Methods Diagram

High Position Lifting

Vertical Enhancement

Section 3: Standard Enhancement

JadeDoor enhances door production line

Enhance door hardware and panels