Slot weld pipe sizes and models for curtain walls, various slot weld pipe models

Molded slot焊接管道 for facade applications offers a wide variety of sizes and types, including some common ones below: 1. **Square Slot Welded Pipe**: - **Edge Length Range**: Common edge lengths include 20mm×20mm, 30mm×30mm, 40mm×40mm, 50mm×50mm, and larger sizes up to 100mm×100mm, 120mm×120mm, 150mm×150mm, with custom sizes available as needed. - **Slot Dimensions**: The depth of the slot typically ranges from 5mm to 20mm, and the width is about 3mm to 15mm, with specific dimensions determined by facade design requirements and glass installation needs. For instance, small facade projects may use 5mm deep and 5mm wide slots, while larger commercial facades might require deeper and wider slots to ensure secure glass installation. 2. **Rectangular Slot Welded Pipe**: - **Size Specifications**: Rectangular slot welded pipes come in various sizes like 30mm×20mm, 40mm×30mm, 50mm×40mm, 60mm×40mm, 80mm×60mm, and 100mm×80mm. - **Slot Characteristics**: The slot dimensions are similar to square slots but adjusted according to the specific size of the rectangular pipe to meet facade installation and structural requirements. 3. **Circular Slot Welded Pipe**: - **Pipe Diameter Range**: The diameter usually ranges from 20mm to 150mm, with commonly used sizes including 30mm, 50mm, 80mm, and 100mm. - **Slot Design**: The slots are typically set along the axial or circumferential direction of the pipe, with a relatively small depth and width, depth possibly between 3mm and 10mm, and width around 2mm to 8mm, mainly used for fixing glass or other decorative panels. In actual facade projects, the selection of the specific size and type of molded slot welded pipe should be considered based on various factors such as design style, structural requirements, glass size, and budget.