Smart Condensation Dehumidifying Device

User Manual

I. Product Overview

Currently, the power industry commonly employs the following de-WetMethod remains heat treatment removalWetThe heating method for moisture removal primarily achieves its effect by raising the temperature inside the electrical cabinet. Since air at higher temperatures can hold more moisture, this prevents condensation directly on the terminals and other electrical equipment inside the box, thereby preventing accidents such as arcing and short circuits.

But since the moisture in the air at higher temperatures remains suspended, when the environmental temperature changes, the air becomes more...WetThe temperature will quickly lead to condensation. Therefore, maintenance personnel often find that heat-activated dehumidifiers are installed.WetThe electrical cabinet, terminal strips, and box walls still have severe condensation, posing a risk to the safe operation of the equipment.

Smart DehumidificationWetThe device is designed for general heating dehumidification applications.WetThe drawbacks of the existing equipment, while the newly developed descaler...WetApparatus.

Smart DehumidificationWetThe device utilizes the Peltier effect, with a refrigerating plate as the core component. It produces an extremely low temperature at the cold end, forming a condensation surface. This causes moisture in the air to condense on the surface and be drained out of the box through the drainage holes. As the moisture inside the electrical cabinet continuously decreases and is drained out, the airWetSignificant reduction. Even with changes in ambient temperature, condensation will no longer occur due to the extremely low moisture content in the air within the electrical cabinet. This addresses the issue fundamentally.WetHigh-grade issues.

II. Technical Specifications

1) Power Supply: AC 220V

2) Power: 60W

3) Display Method: 2-Digit Digital Display

4) Set-point Start Threshold: 65% (Default)

5) Daily consumption excluding shi: 350ml/day (at 35°C),Moist85% RH operating condition

6) Dimensions: 165×130×67mm

7) Suitable working temperature range: 5℃ to 50℃

8) Suitable for workWetHumidity Range: 40% to 95% RH

III. Features and Characteristics

Convert moisture in the air into liquid and expel it.

2) Intelligent control features manual forced de-WetFeatures;

3) Can set working threshold independently.

4) Equipped with air circulation channels, the shi effect is enhanced.

5) Overall design is user-friendly, with easy operation and installation.

6) Low power consumption.