Smart Condensation Dehumidifying Device

User Manual

I. Product Overview

Currently, the power industry widely employs the following desulfurization method:WetMethod remains heat treatment for removalMoistHeating method exceptWetMachine excludingWetPrimarily achieved by raising the temperature inside the electrical cabinet. Higher temperatures allow air to hold more moisture, thereby preventing condensation directly on the electrical equipment terminals and other components within the cabinet, thus preventing accidents such as arcing and short circuits.

But the moisture in the air at higher temperatures remains suspended, and when the environmental temperature changes, the air becomes more...MoistThe temperature will rapidly lead to condensation. Therefore, maintenance personnel often find that heating-type dehumidifiers are installed.WetThe electrical cabinet, terminal strips, and box walls still have severe condensation, posing a hazard to the safe operation of the equipment.

Smart DehumidificationMoistThe device is designed for general heating type desiccant.WetThe existing shortcomings of the equipment, while the newly developed descaling technology boasts...MoistMachine.

Smart DehumidificationMoistThe device utilizes the Peltier effect, with a refrigeration plate as the core component. The cold end produces an extremely low temperature, forming a condensation surface. This causes moisture in the air to condense on the surface and be drained out of the box through the drainage holes. As the moisture inside the electrical cabinet continuously decreases and is drained out, the humidity in the air significantly drops. Even if the ambient temperature changes, no condensation will occur due to the extremely low moisture content in the air inside the cabinet. This fundamentally resolvesWetHigh-grade issues.

II. Technical Specifications

1) Power Supply: AC 220V

2) Power: 60W

3) Display Method: 2-Digit Numeric Display

4) Setpoint Activation Threshold: 65% (default)

5) Daily Shipment: 350ml/day (at 35°C, 85%RH)

6) Dimensions: 165×130×67mm

7) Operating Temperature Range: 5°C to 50°C

8) Suitable working humidity range: 40% to 95% RH

III. Features and Characteristics

1) Convert moisture in the air into liquid and expel it.

2) Intelligent control with manual forced dehumidification function.

3) Can set working threshold values independently.

4) Equipped with air circulation channels for enhanced dehumidification effects.

5) Overall design is user-friendly, with easy operation and installation.

6) Low power consumption.