Extruder
Main Screw Diameter: 80mm
2. Major screw length/diameter ratio: 26D
3. Main Screw Speed: 65 rpm
4. Number of Main Screw Heating Sections: 3 stages
5. Main Screw Heating Power: 8kW
6. The main screw has two sections with an exhaust device, and the temperature value can be displayed on the human-machine interface.
7. The auxiliary screw has a blowing device at point 2, with temperature values displayed on the human-machine interface.
8. AC Variable Frequency Motor + Inverter (Japan SANKEN): 30 HP (Japan SANKEN)
9. Counter shaft diameter: 55mm
10. Number of auxiliary screw heating sections: 3 stages
11. Counter shaft motor: 7.5HP
12. Pitch Diameter to Length Ratio: 24D
13. Counter shaft speed: 65 rpm
B. Molding Head (with support bracket)
Mold Type: 1-out-6 double-layer mold head, center distance 85mm
2. Number of Heating Sections: 21
3. Heating Capacity: 18KW
C. Clamping Unit:
1. Mold Length: 200-450mm
2. Mold Width: 480 mm
3. Molding Pressure: 8.9 Ton (170 kg/cm²)
4. Molding Open/Close Limit: 240～640 mm
5. Air circulation time: 6 seconds x 2 sides = 12 seconds
6. Molding Travel 450mm
7. Add-on Track Cover
8. Template Width: 420 mm
9. Crank Locking Mechanism
D. Pressure Unit:
Servo Pump Drive Motor 30HP (Japanese Nippon Koso) + 7.5HP (Tung Hwa)
2. Fuel Tank Capacity: 150 gallons
3. Working Pressure: 140 kg/cm² (Molding: 170 kg/cm²)
4. NOK equivalent oil seal
5. Hydraulic Solenoid Valve: YUKEN (or equivalent brand)
E. Electric Control Unit:
1. German BECKHOFF control systems, Japanese MOOG wall thickness servo valves, German REXROTH high-speed proportional valve mold shifting control.
2. The entire machine's functions and status are monitored and set by this operation station, including temperature settings, oil pressure system pressure and flow speed settings, function selection, alarm display, thickness control, manual operation of all actions, data storage, and sequential control.
F. Air Compressor Unit:
Air Pressure: 5-7 kg/cm²
2. Compressed Air Consumption: 1500 L/min
3. Mechanical cooling water consumption: 800 L/hr
4. Molding cooling water consumption: 1000 L/hr
5. Set of 3-point assembly (FESTO)
6. 2 Pressure Regulators (for operation and blowing)
7. Instant inflation, vacuum feature
G. Wind Pressure Unit: (Reference)
1. Gas Storage Cylinder: 0.3 m³
2. Pressure Differential Solenoid Valve: FESTO
3. Simple Thick Cooling Assembly (for blowing cooling)
H. Others:
Inner layer 80%, outer layer 20%
2. Product Diameter Range: 20-70mm
3. Product Volume Range: 150-2,500 mL
4. Mechanical Dimensions: 3.5m (Length) x 2.8m (Width) x 2.5m (Height)
Please call for inquiries!
Pan Sheng: 13794968646
Dong Sheng: 185-6655-5721
Qin Sheng: 13422582665
Wang Sheng: 139-2684-1008
Contact Email: info@omegatechnique.com
