Concrete Cutting Machine CUTTING MACHINE FOR SHEAR WALLS  Multi-functional Wall Cutting Machine

The concrete reinforcing bar cutting wall machine is suitable for cutting or grooving reinforced concrete walls, brick walls, or stone materials, etc.

Concrete Reinforcement Cutting Wall Machine Repair and Inspection

Urgent: Do not plug in the power before checking the machine.

Here is the translation: - 本（Without context provided, the character “本” alone doesn't have a direct translation in English. It might be a part of a word or phrase. Please provide the complete Chinese content for accurate translation.)MachineCumulative working time exceeds24Hour(s)Clean and maintain the machinery. Ensure the lubrication and mobility of the lifting screw main shaft on the hoist (no mud or debris allowed, as it aids operation; otherwise, it can damage the machine.)

1Inspect saw blades

Reduce cutting efficiency with worn-out saw blades and avoid motor overload; timely replace the saw blade arrow.

2Inspect the wheel

Inspect the base below16Wheel only, whether it gets stuck or fails.,The gap between the wheel and track must not exceed0.2mmLoosen the slider wheel fixing nut, and adjust the corresponding hex set screws on both sides of the machine base.

3Regular inspections

Monthly inspection required: Parallelism between the blade's travel direction and the track, as well as the distance between the leading edge of the blade and the track, must not exceed1 mm,Otherwise, the concrete may jam the blade during cutting, reducing cutting efficiency..If not parallel, it can be used6mmLoosen the hexagon socket on the center seat.4Double-speed box fixed screws.Adjust the parallelism of the taper saw blade.