AY-800 Wall Cutting Machine - Masonry Wall Saw - Concrete Wall Cutting Machine

The wall cutting machine is primarily used for building or old building renovations, reinforcement, and design changes, capable of cutting large areas of walls such as door openings, windows, and elevator shafts. It features manual feeding and cutting. The structure is non-damaging and forms in one go, not only avoiding potential structural damage to buildings caused by traditional hammering construction but also saving time, resources, and labor compared to drilling circular exhaust holes.

Main Technical Parameters:

Saw blades:800mm Cutting Depth: 32cm

Power Voltage:220V, Power: 6200W

Dimensions:100*100*80cm

Product Real Photo Display

Wall Cutting Machine Operation Instructions:

Secure the track with expansion bolts, place the machine on the track (the track has teeth and the machine has gears, so it won't slip; movement is only possible with the handwheels), install the blade and the protective cover. Once water and electricity are connected, operate the two handwheels: the middle handwheel controls the up and down movement of the blade, and the right-hand handwheel controls the machine's movement along the track.

Application Range: Suitable for concrete walls, brick walls, or stone, highways, bridges, and construction engineering cutting. Capable of cutting at any angle, occupies minimal space, and allows for flexible control of cutting area.

High power, stable output, export-grade gears, durable, fast cutting speed Higher material strength, twice that of a regular cutting machine; the lift screw is made of bearing steel, and the screw threads are widened.2x, betterDurable  Rarely requires replacement; dust cover with fixed bend and integrated design of the entire unit AY- 800 Manual Cutting Machine [Best Seller] Technical Specifications:

Motor Power:6680

Power Voltage:220V

Saw blade speed:300-600R/MIN

Blade Diameter:800MM

Cutting Depth:32 cm