Wall Banger, Wall Cutting Machine, Reinforced Concrete Door and Window Hole Opener

Wall cutting machineZX-800

Voltage:220V-
Frequency:50-60Hz
Power:6680W
Use saw blades:12〞-32〞，300mm-800mm
Cutting Depth: 320MM, suitable for cutting or grooving in reinforced concrete walls, brick walls, or stone materials.

Wall cutting machines are primarily used for building renovations, reinforcement, and design changes, capable of cutting large areas of walls such as door openings, windows, and elevator shafts.AnyuanThe wall cutting machine features a non-destructive structure and is formed in one go, which not only avoids the damage to the building structure caused by traditional hammering construction methods but also saves time, materials, and labor in drilling circular holes. The wall cutting machine is a crucial piece of equipment in concrete production, directly impacting the production line's processes, layout, and the dimensions and appearance quality of the products. Our company's wall cutting machine technology is stable, Superior performance, highly praised by attentive customers. Shipped to  Various locations, become users of concrete block machine production linesHelper。

Concrete Reinforcement Cutting Wall MachineMachine Installation

First install the moving track, then place the machine on the track.To enable horizontal cutting of walls, the correct installation of the moving track is: the motor should face upwards and the blade downwards. During cutting, the rotation direction of the blade should be as opposite to the motor's running direction as possible. This not only reduces the cutting time but also improves the cutting efficiency.

1. First, drill a hole with a hammer drill at approximately 165mm from the self-separating cut, creating a fixed hole with a diameter of 16.3-16.5mm and a depth of 55mm. This hole can only accommodate one M12 expansion bolt included with the machine. The track can be installed and used in any direction around the hole.

2. Clean out the small debris inside the holes with a blow gun.

3. Insert the M12 expansion screw provided with the machine, then tap the screw into the expansion screw hole using a mallet, and hammer it to secure the expansion screw.  Ensure that the expansion bolts are securely fastened in the holes; otherwise, the machine may move or fall off during operation. Use the expansion bolts and screws, as well as the fixed guide tracks provided with this machine, and determine the number of expansion bolts based on the softness of the cutting surface. Track Secure firmly.

4. When installing the main unit, align it with the forward indicator on the unit, then sequentially connect the speed controller and the plug. Turn the handwheel counterclockwise to move the main unit along the track.

5. Insert the blade; the inner hole of the main unit is 35mm. The six-sided screws for securing the blade  Open-end wrench  Securely lock.

6. Align the blade with the cutting line and position the feed track  Securely tighten, then use a hex wrench to horizontally adjust the six hex head leveling screws along the track, to ensure level adjustment; this prevents the track from derailing at the connection point.