Electric (Electro-hydraulic) Sluice Gate, Dock Discharging and Loading Valve, Electro-hydraulic Hopper Discharge Valve
Electro-hydraulic flap gate product features
Electro-hydraulic sector gate is equipped with a dust cover at the discharge outlet to prevent dust from flying: it uses an electro-hydraulic push rod as the power source, replacing cylinder transmission, thus saving engineering investment costs; the electro-hydraulic sector gate valve body features a stepped structure, reducing material flow impact; the critical parts of the valve body are lined with a grate structure.Abrasion-resistant Backing pads, reducing direct wear on the pads
This series of electro-hydraulic jaw gate is used in industries such as metallurgy, mining, power, chemicals, and building materials. It serves as the unloading device for various particle discharge systems.
1. The DEZ type jaw gate has a simple structure and employs Welded from steel plate, powered by electro-hydraulic drive and gear transmission, operates smoothly with low failure rate, easy maintenance, and capable of quickly cutting off the material flow.
2. The HDEZ type environmental-friendly labial gate features a fully enclosed structure, compact design, electro-hydraulic push rod drive, and gear transmission, ensuring smooth operation with low failure rate and no material jamming. It's easy to maintain and can quickly cut off the material flow while being environmentally friendly.
Operation of Electro-hydraulic (Electric) Sluice Gate (Sluice Valve): Firstly, when installing, please note the medium flow direction indicated on the gate body. When connecting the two flanges. Seal the gaskets and then evenly tighten the bolts. Next, when in operation, identify the direction of the butterfly valve switch and properly wire the actuator. It's in operation. Regularly apply lubricant to all transmission parts to extend the lifespan of the palate valve. Improper operation will increase the wear on the palate valve.
Electro-hydraulic Flat Sluice Gate Working Principle: The electro-hydraulic flat sluice gate is mainly composed of a frame, screw nut, handwheel, and sluice plate, with the handwheel...The sprocket rotates, causing the screw and nut along with the gate plate to move horizontally back and forth, thereby achieving the purpose of opening and closing the valve.
