Hebei Prefabricated Galvanized Steel Water Tank, Fireproof Galvanized Steel Water Tank, the galvanized water tanks are mainly made of high-quality Q235 steel plates, which are formed into standard panels of 1000×1000, 1000×500, 500×500, etc., after being hot-dipped galvanized to form the galvanized water tank panels. Galvanized Water Tank Advantages: Scientific molding technology increases the strength several times, ensuring the water tank's pressure-bearing requirements while saving materials and meeting the aesthetic and practical requirements of the water tank. The sealed design of the galvanized water tank prevents the growth of algae and red worms, avoiding secondary water pollution. 1. Hot-dipped galvanized steel plate water tank (manufactured according to gb02s101) 2. Compared with prefabricated enamel steel plate water tanks, the tank structure, material selection, and assembly method are completely the same; the difference lies in the anti-corrosion method. 3. The hot-dipped galvanized water tank uses a special process, selects high-quality materials, and forms a dense galvanized layer on the tank panel through hot-dipping, allowing the ions between the steel plate interface to penetrate and mix to form a diffusion layer, increasing the adhesion strength of the galvanized surface. The smooth surface is easy to clean and resistant to corrosion. The steel plate assembly structure is not easy to deform, has strong shock resistance, and can withstand great impact forces. After long-term widespread use, it shows excellent performance and receives positive feedback from users. 4. The hot-dipped galvanized water tank uses Q235 steel plates, which are stamped into standard blocks of 1000*1000 and 1000*500 500*500, with holes drilled around, then zinc-plated and assembled on-site. During assembly, the standard blocks are sealed with silicone and connected with bolts. 5. This product is suitable for the storage and regulation of building water supply, expansion and condensation tanks in heating systems, temporary water storage tanks for construction, geological surveys, industry, and national defense projects. 6. The diameter and location of the inlet, outlet, and overflow pipes of the hot-dipped galvanized water tank are determined by the design; there should be at least 700mm of space around the tank, and at least 600mm at the bottom and top. During installation, the gaps between the bottom of the tank and the standard blocks should rest on the supports. 7. Corrosion protection: The hot-dipped galvanized water tank body and accessories are all zinc-plated. 8. Hot-dipped galvanized water tank water test: After the tank is assembled, close the outlet and drain pipes, open the inlet pipe, and fill the tank while checking; if there is no leakage after 2-3 hours, it is considered qualified. 9. The hot-dipped galvanized water tank has a detection report from the national inspection department. 9.1 When placing an order, provide tank size, pipe connection location, and pipe diameter. 9.2 The recommended water storage temperature is 4-65℃; if the temperature is higher, it can be requested during the order and resolved separately. 9.3 The load on the ground from the tank should be determined by the structural designer. 10. Hot-dipped galvanized water tank water test: After the tank is assembled, close the outlet and drain pipes, open the inlet pipe, and fill the tank while checking; if there is no leakage after 2-3 hours, it is considered qualified. 11. The hot-dipped galvanized water tank has a detection report and a health permit from the national inspection department. 12. Instructions for the use of hot-dipped galvanized water tanks: 12.1 When placing an order, provide tank size, pipe connection location, and pipe diameter. 12.2 The recommended water storage temperature is 4-65℃; if the temperature is higher, it can be requested during the order and resolved separately. 12.3 The load on the ground from the tank should be determined by the structural designer. 12.4 If the provided water tank pipe connection location is exactly at the panel seam, our company needs to make adjustments, but the pipe diameter remains unchanged. 13. Applications of hot-dipped galvanized water tanks: Galvanized water tanks are used for the storage and regulation of building water supply, expansion and condensation tanks in heating systems, temporary water storage tanks for construction, geological surveys, industry, and national defense projects.