Applicable Scope(Scroll down for a large collection of case photos for reference)
Flat glass, marble, metal sheets, etc., vertical through-type drySandblasting MachineApplicable to widths less than2.4 meters
Length is not limited. Can be designed for automatic or manual operation.
Flat glass, marble, metal plate vertical through the type dry sandblasting machine,
apply to width of less than 2.4 meters unlimited length.
◆ Main Technical ParametersParameters for reference, please contact us for specific business matters!
Machine Model Model | STR-1200 Model GlassSandblasting Machine(Other customizable options) |
Work cabin dimensions Working class size(mm) | 900×700×2000 |
Overall dimensions Complete machine size(mm) | 3000×1000×2300 |
Outer dimensions Conveying the size(mm) | 1800×600×100 (2 pcs) |
Compressed Air Source Compressed air source | 2-8bar(kg/cm2) |
Separator Motor Separator motor | 220V 50HZ 550W |
Separator air flow Separator air volume | 8.5m3/min |
Luminaire Floodlight | 220V, 30W (Explosion-proof Energy-saving Lamp) |
Machine Weight Machine weight | 400 kg |
Product Features
Grind impurities from the glass edges and flatten it to create frosted glass.
Available for customization; This machine primarily handles the treatment of metal oxides on the conductive and semi-conductive surfaces of solar glass; it can clean the four edges of the glass to meet full automation requirements!
Will the edge of glass impurities peace surface process into ground glass.
According to special requirements; This machine is mainly deal with solar glass surface of conductor and semiconductor metal oxygen Iodide processing; Main clean glass quads can achieve the requirements of the automatic!
◆ Main Technical Parameters
Machine Model Model | STR-BL Glass EdgesSandblasting Machine |
Overall Dimensions Complete machine size(mm) | 3380 ×1200× 2080 |
Dust Removal System Dust removal system | 800× 800× 2480 |
Dust Extraction Motor Dust removal motor | 1.5KW 380V |
Speed Control Motor Control motor | 1.5KW 380V |
Spray Gun Working Pressure Gun work pressure | 0 .28 - 0.7Mpa |
Each gun flow Every gun flow | 0.8 - 1.2m3/min |
External Air Source Inner Diameter External air inside diameter | ￠13mm |
Abrasive Abrasive | Particle size46-220# is customer's choice. |
Spray Gun Gun | 4 pieces |
Dust removal method Dedusting method | Baghouse dust collection system is used16-bag dust collector |
GlassSandblasting MachineAs the name implies, it is specifically customized for glass spraying.Sandblasting MachineSuitable for glass engraving, lettering, and sandblasting effects, it can also be used for spray materials on workpieces such as steel plates and tiles. Its working principle is to use the impact force of sand particles on the glass surface to achieve various sandblasting effects. According to its working principle, it can be divided into general pressure glassSandblasting MachineWith pressure glassSandblasting MachineGeneral pressure glassSandblasting MachineIt operates on the siphon principle, suitable for regular glass sandblasting, with an approximate sandblasting efficiency.8 sqm/hour; pressurizedSandblasting MachineFor pressure pot shot blasting, it is powered by compressed air, which, through the working pressure established in the pressure pot by the compressed air, propels abrasive material to strike the surface of the workpiece. It is suitable for high-hardness, thick special glass and sheet materials, with a shot blasting efficiency of approximately...12 square meters per hour, this model is suitable for clients requiring a certain output in sandblasting.
GlassSandblasting MachineBoth sides are equipped with roller supports. Workers place glass of the appropriate size on the roller架, move the glass in sequence according to the progress of the sandblasting work, perform sandblasting, and achieve the desired sandblasting effect. Common abrasives include brown fused alumina, quartz sand, white fused alumina, steel shot, etc., with the choice of abrasive depending on customer requirements.
Specific operational procedures are as follows:
1. Engrave the desired design or text onto the sandblasting protective paper using a laser engraver.
2. Apply the protective paper tightly to the glass or marble.
3. UsedSandblasting MachineGun nozzle inside the cabin sandblasting unprotected paper areas
Peel off the protective paper.
5. The beautiful patterns required will be displayed.
GlassSandblasting MachineFor cabinet-styleSandblasting MachineDuring operation, the sand material is automatically recycled, separated, and dusted, ensuring no dust pollution indoors and no harm to workers. The operation is simple with a low failure rate. The patterns produced by sandblasting are exquisite, and it is widely used in the sandblasting industry.
Partial manual glassSandblasting machineAutomatic glassSandblasting Machine, automaticSandblasting MachineUse Cases:
