Product Overview
There are three series of pipeline high-shear mix emulsifiers.
Single-stage series, double-stage series, triple-stage series, capable of meeting the dispersion, emulsification, and homogenization process requirements of various users, operating conditions, and industries, as well as varying production volumes. The high-shear mixing emulsifier features include:
*Capable of continuous mass production with no blind spots, narrower particle size distribution, higher uniformity, easy to operate, and capable of automation.
Compact structure, easy installation, small space occupation, stable operation, low noise.
The internal transmission of the work chamber employs a cantilever design, allowing for axial feeding and radial discharge.
Suitable for high-temperature, high-viscosity, and high-flow conditions such as modified asphalt, emulsified asphalt, pulp dispersion, plastics, rubber, and environmental protection fields.
*Available sealing types: mechanical seal, cage seal, packing seal.
*Equipped with storage tanks, it is suitable for both in-series process operations and reciprocating processes. This design ensures that all materials entering the mixing container must pass through the precise clearance between the stator and rotor before exiting. Its powerful suction capability is sufficient to draw materials up and flow them down without the need for auxiliary pumps. Special single or double mechanical seals are used for intense process conditions.
SMG400A-1 Single-Stage Pipeline High-Shear Mixing Emulsifier
The working cavity is equipped with a set of stator and rotor, with internal transmission
Axle is cantilever-type, transmission shaft directly connects with the motor, sealed type
The design generally employs mechanical seals, but other sealing options are also available.
Suitable for medium and small batch cyclic processing production, recommended
When used in conjunction with an intermittent high-shear dispersing emulsifier, the processing effect is
Better.
Features: Built-in mechanical seal, direct contact with material, suitable
For low viscosity, low-temperature liquids.
SMG400B-1 Single-Stage Pipeline High-Shear Mixing Emulsifier
The working cavity is equipped with a set of stator and rotor, transmission within the working cavity
The moving shaft is designed with an overhanging arm, and an elastic coupling connects the motor with the bearing housing.
Internal shaft connection, enhancing the operation quality of the drive shaft, sealed
The form is selected based on different working conditions.
Suitable for medium to large-scale cyclic processing production processes or high
Operating under warm conditions, it is recommended to use an intermittent high-shear dispersing emulsifier.
Used concurrently, yields superior processing effects.
Features: External mechanical seal, does not come into contact with material.
Suitable for medium to high viscosity materials.
SMG400B-3 Series Pipeline High-Shear Mixing Emulsifier
The working cavity is sequentially equipped with three sets of stators and rotors from the feed port to the discharge port. The material must be sheared and dispersed by the three sets of stators and rotors before it can be discharged through the outlet.
