Product Overview
A胶磨mill is a high-tech slurry equipment integrating functions such as shearing, crushing, and grinding. The crushing and slurry technology of this equipment is an innovative technology in the colloid mill industry, widely used in the crushing, grinding, and slurry preparation of various materials.
My company can also customize...Custom designed and manufactured for the characteristics of your material.High-pressure colloid mill equipment, pressure-resistant range up to0MPa~20MPa。
The appearance of the high-pressure colloid mill equipment is shown in the image below.
Technical Specifications
Model | Treatment Capacity m³/h | Motor Power: kW | Import/Export Dimensions mm | Feed Material Granules mm |
JTM-05WN | 0.1-0.5 | 5.5-11 | 80/40 | 3～10 |
JTM-1WN | 0.2-1 | 11-22 | 100/50 | 3～20 |
JTM-3WN | 0.5-3 | 22-30 | 125/50 | 5～30 |
JTM-5WN | 1-5 | 30-37 | 125/65 | 5～30 |
JTM-10WN | 3-10 | 37-55 | 150/80 | 5～40 |
JTM-20WN | 8-20 | 55-90 | 150/100 | 5～40 |
Note: Motor power is determined by the user's material's viscosity, particle size, and solid content for specification and model.
可选破碎机泵壳材质: 304, 316L, 2205, TA2, C-276.
The stator material can be selected from stainless steel or alloy steel.
Stainless Steel: 304, 316L, 2205, 9SiCr, TA2, C-276
Alloy Steel: 38CrMoAl, NM500, Cr12MoV, GCr15
Product Principle
Under high-speed motor drive, various particle sizes in the material must withstand tens of thousands of high-speed shearing cuts by the conical sawtooth blades of the impeller as they pass through the channel into the rotor's fan-shaped cutting chamber. Under the centrifugal force of the conical sawtooth blades, the particles are flung outward into the space between the slanted triangular diamond-shaped teeth on the rotor and the stator, where they undergo centrifugal extrusion, high-speed cutting, and crushing grinding processes. As the material is crushed and refined, it gradually moves toward the crushing and grinding area. Due to the strong high-speed shearing effect and high-frequency oscillation caused by the superimposed crushing motion, the particles in the material are continuously sheared, crushed, and ground to achieve the particle size requirements specified by the customer, after which they exit through the pump outlet. The particle size of the material ground and refined by the crushing and grinding machine is generally between 0.1 to 1 mm.
Note: The user provides parameters related to material characteristics, or brings materials to the production base for on-site testing. The manufacturer selects the internal structure of the grinding disk based on the medium characteristics.
The copyright of this website and all equipment images belong to Nantong Fulaike. Copyright infringement will be pursued.
