Variomix A/H is a hydraulic plunger pump type fixed-displacement and mixing system, particularly suitable for continuous processing of a wide range of materials with low to high viscosity, such as epoxy resins, polyurethanes, or polysiloxanes. The materials supplied can include filled or unfilled substances, abrasive materials, or corrosive substances.

Features

The pressure tank is mounted above a portable base, supplying material to the plunger pump. A lever drive system is installed between the metering pump and the pneumatic motor. The metering pump, driven by the pneumatic motor, mixes materials in a pre-selected ratio. The mixing ratio can be adjusted within the rated range by the lever drive system, and controlled via the metering computer control system.

The Variomix A/H system is equipped with a 2K valve and disposable static mixing tubes. The 2K valve has a "suction back" effect, preventing drops of adhesive (oil) from spilling at the end of operation. When the mixed material in the mixing tube solidifies, the tube can be easily replaced, simplifying the process, reducing costs, and saving time. There's no need to flush the mixing tube, thus avoiding environmental pollution.

Features and Advantages

• Simple to operate

• Multiple blending ratios

• Multiple output speeds

• Continuous output

• Solvent-free

Typical Applications

• Coating

• Sealed

• Adhesive

• Laminated

• Packaging