Guangdong Foshan Da Niao Xiang Real Ceramic Adhesive Wholesale - Manufacturer - Sales Secret Tips: Color Selection and Matching Tips Principle One: Contrast Color Matching. Combinations like black and white, dark and light, dark green and light gray are all suitable. Repeated use of contrasting colors creates a visual appeal, making the space stable yet not monotonous. Principle Two: Analogous Color Matching. Using colors close to the same color scheme will give the entire space a quieter, elegant feel. Tips: 1. Due to variations in the base material's transparency grade and other reasons, there may be differences between the actual construction effect and the color board, which is a normal situation. Please refer to the actual construction effect as the standard. 2. There may be slight color differences between different batches of products. For large-scale construction, please use products from the same batch or conduct a small-scale test before construction to ensure the decorative effect. The construction temperature should be between 5°C and 35°C. When the construction environment temperature is low, you can soak the adhesive in hot water for about 5 minutes to preheat before proceeding to the next step. Sealant is an upgraded product of grout, with明显 superior decorative and practicality compared to colored grout. It solves issues like unattractive tile gaps and dirtiness. Traditional sealant is applied on the surface of grout, while the new sealant does not require a grout base and can be directly filled into tile gaps after tile bonding. Suitable for filling gaps larger than 2mm, it is easier to apply than the ordinary type and is an upgraded version of grout. Construction Tools: Adhesive Gun, Sponge, Water Spatula, Cleaning Tool, Material Board, Basin, Towel, etc. Adhesive Gun - Used for applying the sealant. Sponge - Has three functions, works closely with the water spatula; used alone to smooth the sealant, similar to a towel for cleaning. Water Spatula - Used to smooth the sealant. Cleaning Tool - Scissors or a special grout cleaning tool (flat-headed cylinder screwdriver) for cleaning out the grout. Basin - Fill half with water to moisten the towel, clean the sponge and water spatula. Towel - Wet and used to moisten the 7cm edge of the tile gap on both sides. Gloves - Wear to prevent the sealant from getting on your hands.
