Guangdong Da Nai Xiang No-Screw Adhesive Manufacturer - Market Price - Supplier. Da Zhuan Wan No-Screw Adhesive boasts strong adhesion, significantly replacing nails. It can bond and fix wood, gypsum board, medium-density fiberboard, stone, cement tiles, metal, plastic, rubber, and more materials without drilling holes on the surface. Product Features: 1. High bonding strength; 2. Excellent flexibility, non-crisp, unaffected by building shrinkage or movement; 3. Versatile, bonds most substrates, even wet wood; 4. Non-sagging, can be used for filling gaps, can be painted after drying; 5. Good weather resistance, waterproof. Usage: Clean the work surface, ensure no oil or dust; cut the tube opening, fit the nozzle, use a sealant gun to extrude; dry bonding method: (suitable for lighter objects and low-pressure joints) squeeze several lines of no-screw adhesive in a zigzag pattern, 40 cm apart per line; press the adhesive side towards the joint and gently pull it open for a few minutes after the adhesive evaporates, then press the two sides tightly; bonding method: (suitable for heavier materials) apply no-screw adhesive as described, then use clamps, nails, or screws to secure the bonding surfaces; remove the clamps after the adhesive sets (about 24 hours), the no-screw adhesive can be moved for 20 minutes, and the bond becomes more stable within 2-3 days, reaching optimal effect in 7 days. Precautions: The no-screw adhesive can be cleaned with turpentine before it sets, and the dried residue can be scraped or sanded off. This product can be used with floor installation: bonding strength may weaken under high temperatures (avoid long-term bonding to metal in direct sunlight). Avoid prolonged skin contact. Use in a well-ventilated area, away from high temperatures or fire sources, store in a cool, dry place; avoid contaminating water sources: discard the remaining product after it is completely dry. 1. High bonding strength 2. More robust and durable Suitable for any climate Can bond various substrates