I. Product Overview

Textile dyeing and finishing anti-foaming agentThis is our company's new research achievement, characterized by its ability to rapidly defoam and sustain anti-foaming properties under medium to high-temperature, strong alkaline conditions. The product features include: high concentration, good solubility in water, non-oily, acid and alkali resistance, and high-temperature resistance up to 95-130°C. It demonstrates excellent anti-foaming persistence and good defoaming properties in both non-ionic and anionic surfactant systems.

II. Composition

Composed of special nitrogen-containing organic compounds and other additives, as well as a small amount of modified polysiloxane.

Typical Product Data

Appearance: White milky liquid

Model: XPJ-20Y

Solid Content: 20±1% Density (25℃): 1.0±0.1 Viscosity: 150~200 cps

Stability (3000rpm/15m): Non-segmented pH Value: 6~8

Shelf Life: 6 months

Section 4: Applications

Textile dyeing and printingDefoamerUsed throughout the textile dyeing process; also utilizes general-purpose OK oil penetrants, cleaners, foam agents, leveling agents, softeners, finishing agents, antique oils, printing acrylics, pretreatment, textile fiber oils, refining agents, fabric dyeing and finishing, medium-temperature polyester dyeing, textile sizing and auxiliaries, desizing, bleaching, washing, water treatment systems. Recommended dosage: The addition of textile dyeing defoamer is 0.05% to 0.3% of the total shipment volume, but the economical dosage should be determined after process testing; it can also be mixed uniformly with other powdered auxiliaries.

V. Instructions for Use

This product can be directly injected into the foaming system or diluted for use. When used as an antifoaming agent pre-added to the foaming system, ensure compatibility with the system.Please provide the Chinese content to be translated.

Six,Packaging

This product is available in 25L, 200L plastic drums or 1-ton boxes.

Section 7:Storage

This product should be stored in a cool, dry indoor environment; it should not be left in high or low temperatures for extended periods.

Section 8: Product Safety

This document is prepared based on our current knowledge and experience and is provided for customer reference. Therefore, you should conduct tests to determine the suitability of this product for your specific use. This product is manufactured according to the current corporate standards, and in case of loss due to non-compliance with the old standards, the company assumes the responsibility of refunding the payment or replacing the product.